{"title":"SurgiWorld Orthodontic Instruments","description":"\u003cp\u003eExplore SurgiWorld orthodontic instruments for professional orthodontic care.\u003c\/p\u003e","products":[{"product_id":"surgiworld-merium-plier-de211","title":"SurgiWorld – Merium Plier","description":"\u003cp\u003eMerium Plier is a one-piece spring-steel plier with a gently curved, serrated tip, used for general chairside pick-up work across restorative, hygiene, and exam appointments.\u003c\/p\u003e\u003cp\u003eThe curved tip gives a slightly better access angle and line of sight than a straight pattern when working in the posterior of the mouth, while the fine serrations on the jaw hold cotton rolls, cotton pellets, gauze, and small restorative items securely without crushing or dropping them. As a single-piece spring-steel design, it has no pivot joint that can loosen or bind after repeated autoclave cycles, so grip tension stays consistent over the life of the instrument.\u003c\/p\u003e\u003cp\u003eA ribbed section along the shank provides a secure, non-slip hold with gloved or damp hands, which matters for an instrument that gets picked up and set down repeatedly during a single appointment. It is one of the most-used instruments in a general operatory: placing and removing cotton rolls during isolation, positioning matrix bands and wedges, and handling small tray items without direct hand contact.\u003c\/p\u003e\u003cp\u003eManufactured from medical-grade stainless steel, corrosion resistant, and built to withstand repeated sterilization cycles without losing spring tension.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eOne-piece spring-steel construction, no pivot joint to loosen or bind over time\u003c\/li\u003e\n\u003cli\u003eCurved, serrated tip for improved posterior access and secure pick-up grip\u003c\/li\u003e\n\u003cli\u003eRibbed shank section for a non-slip hold with gloved or damp hands\u003c\/li\u003e\n\u003cli\u003eSuited to cotton roll isolation, matrix and wedge placement, and general tray handling\u003c\/li\u003e\n\u003cli\u003eConsistent spring tension maintained across repeated sterilization cycles\u003c\/li\u003e\n\u003cli\u003eMedical-grade stainless steel, corrosion resistant, fully autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751010894138,"sku":"DE211","price":44.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/DE211_1.jpg?v=1792584541"},{"product_id":"surgiworld-slim-weingart-pliers-rt112","title":"SurgiWorld – Slim Weingart Pliers","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Slim Weingart Pliers have a narrowed profile compared with the standard model. They are a good choice for tight spaces and for reaching posterior segments without pinching tissue.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eThe slimmer jaws fit into small areas, so you can reach a posterior segment without catching the cheek or gingiva. They keep the Weingart shape for placing and removing archwires.\u003c\/p\u003e\u003cp\u003eBetween the standard and ultra slim sizes, this model suits most routine cases where the standard version is a little too bulky.\u003c\/p\u003e\u003ch4\u003eCare and Handling\u003c\/h4\u003e\u003cp\u003eOrthodontic pliers should be used only for the job they are made for. Check that the tips meet evenly before each use, and do not use these pliers to cut wire, which will damage the working surfaces. Keep the box joint free of resin and cement, and put a drop of instrument lubricant on it before sterilization so the pliers keep opening and closing smoothly.\u003c\/p\u003e\u003cp\u003eRun a cloth or brush over serrations and grooves during cleaning, because debris trapped there reduces grip.\u003c\/p\u003e\u003cp\u003ePliers stored loose in a drawer can knock their tips out of alignment. Keep them in a cassette or tray so the beaks are protected between uses and the instrument is ready when the next patient sits down.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eNarrowed profile compared with standard Weingart pliers\u003c\/li\u003e\n\u003cli\u003eReaches posterior segments\u003c\/li\u003e\n\u003cli\u003eAvoids pinching soft tissue\u003c\/li\u003e\n\u003cli\u003eFor placing and removing archwires\u003c\/li\u003e\n\u003cli\u003eBetween the standard and ultra slim sizes\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751015874874,"sku":"RT112","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Slim-Weingart-Pliers.jpg?v=1792584665"},{"product_id":"surgiworld-ultra-slim-weingart-pliers-rt113","title":"SurgiWorld – Ultra Slim Weingart Pliers","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Ultra Slim Weingart Pliers are the thinnest utility pliers in the Weingart range, designed for maximum access. The ultra-fine tips allow wire manipulation in extremely crowded cases or lingual applications.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eCrowded teeth and lingual appliances leave very little room for instruments. The ultra-slim tips reach into those spaces to place or remove wires where wider pliers would not fit.\u003c\/p\u003e\u003cp\u003eUse them for delicate wire placement, and avoid using them on stiff, heavy wires, where a standard Weingart gives better leverage.\u003c\/p\u003e\u003ch4\u003eCare and Handling\u003c\/h4\u003e\u003cp\u003eOrthodontic pliers should be used only for the job they are made for. Check that the tips meet evenly before each use, and do not use these pliers to cut wire, which will damage the working surfaces. Keep the box joint free of resin and cement, and put a drop of instrument lubricant on it before sterilization so the pliers keep opening and closing smoothly.\u003c\/p\u003e\u003cp\u003eRun a cloth or brush over serrations and grooves during cleaning, because debris trapped there reduces grip.\u003c\/p\u003e\u003cp\u003ePliers stored loose in a drawer can knock their tips out of alignment. Keep them in a cassette or tray so the beaks are protected between uses and the instrument is ready when the next patient sits down.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eThinnest utility pliers in the range\u003c\/li\u003e\n\u003cli\u003eUltra-fine tips for crowded cases and lingual applications\u003c\/li\u003e\n\u003cli\u003eMaximum access in tight spaces\u003c\/li\u003e\n\u003cli\u003eWeingart pattern with curved tips\u003c\/li\u003e\n\u003cli\u003eFor delicate wire manipulation\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751015907642,"sku":"RT113","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Ultra-Slim-Weingart-Pliers.webp?v=1792584667"},{"product_id":"surgiworld-straight-how-pliers-rt166","title":"SurgiWorld – Straight How Pliers","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Straight How Pliers are a multi-purpose gripper with round, serrated tips. They are used to grasp archwires during placement and to make minor adjustments to elastics or ligatures.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eThe round, serrated tips hold a wire securely without much pressure. They are used to seat an archwire into the bracket slots and to correct small problems, such as adjusting an elastic or ligature that is not seated correctly.\u003c\/p\u003e\u003cp\u003eThe straight pattern is a general-purpose choice, and an orthodontic tray usually has one at hand.\u003c\/p\u003e\u003ch4\u003eCare and Handling\u003c\/h4\u003e\u003cp\u003eOrthodontic pliers should be used only for the job they are made for. Check that the tips meet evenly before each use, and do not use these pliers to cut wire, which will damage the working surfaces. Keep the box joint free of resin and cement, and put a drop of instrument lubricant on it before sterilization so the pliers keep opening and closing smoothly.\u003c\/p\u003e\u003cp\u003eRun a cloth or brush over serrations and grooves during cleaning, because debris trapped there reduces grip.\u003c\/p\u003e\u003cp\u003ePliers stored loose in a drawer can knock their tips out of alignment. Keep them in a cassette or tray so the beaks are protected between uses and the instrument is ready when the next patient sits down.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eRound, serrated tips for a firm grip\u003c\/li\u003e\n\u003cli\u003eGrasps archwires during placement\u003c\/li\u003e\n\u003cli\u003eAdjusts elastics and ligatures\u003c\/li\u003e\n\u003cli\u003eStraight, multi-purpose pattern\u003c\/li\u003e\n\u003cli\u003eStandard tool for orthodontic procedures\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751015940410,"sku":"RT166","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Straight-How-Pliers.webp?v=1792584669"},{"product_id":"surgiworld-bird-beak-pliers-rt151","title":"SurgiWorld – Bird Beak Pliers","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Bird Beak Pliers are the standard wire forming pliers in orthodontics. One round beak and one square beak let you form loops and bends in round wires of various diameters.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eThe round beak shapes the inside of a loop, and the square beak holds the wire and provides a flat edge for bending. Rolling the wire around the round beak creates a loop of a consistent size, while the square beak is used for angular bends.\u003c\/p\u003e\u003cp\u003eHold the wire near the end of the beaks for small loops, and farther back for larger ones.\u003c\/p\u003e\u003ch4\u003eCare and Handling\u003c\/h4\u003e\u003cp\u003eOrthodontic pliers should be used only for the job they are made for. Check that the tips meet evenly before each use, and do not use these pliers to cut wire, which will damage the working surfaces. Keep the box joint free of resin and cement, and put a drop of instrument lubricant on it before sterilization so the pliers keep opening and closing smoothly.\u003c\/p\u003e\u003cp\u003eRun a cloth or brush over serrations and grooves during cleaning, because debris trapped there reduces grip.\u003c\/p\u003e\u003cp\u003ePliers stored loose in a drawer can knock their tips out of alignment. Keep them in a cassette or tray so the beaks are protected between uses and the instrument is ready when the next patient sits down.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eOne round and one square beak\u003c\/li\u003e\n\u003cli\u003eForms loops and bends in round wires\u003c\/li\u003e\n\u003cli\u003eWorks with various wire diameters\u003c\/li\u003e\n\u003cli\u003eStandard orthodontic wire forming pliers\u003c\/li\u003e\n\u003cli\u003eConsistent loop size\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751015973178,"sku":"RT151","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Bird-Beak-Pliers.webp?v=1792584670"},{"product_id":"surgiworld-light-wire-bird-beak-plier-rt152","title":"SurgiWorld – Light Wire Bird Beak Plier","description":"\u003cp\u003eThe initial phase of fixed appliance treatment uses the thinnest archwires in the sequence. These wires typically 0.014\" or 0.016\" round NiTi or stainless steel are flexible enough to engage crowded and misaligned brackets, but they require correspondingly fine bending instruments. Using a standard-beak bird beak plier on a 0.014\" wire places the wire against beak surfaces proportioned for heavier gauges, making precise loop placement difficult and increasing the risk of kinking the wire or creating an unintentional bend at the wrong position.\u003cbr\u003e\n\n\u003cbr\u003eThe Light Wire Bird Beak Plier solves this with an extended conical beak that is longer and tapers to a finer tip than the standard bird beak profile. The finer tip allows accurate placement of the wire at the exact position along the beak cone where the required loop diameter will form, with enough beak length to produce multiple loop sizes from a single instrument without repositioning. The extended beak length also makes it easier to duplicate loop positions along the archwire, critical when bilateral symmetry of loop placement is needed for Class II or Class III mechanics.\u003cbr\u003e\n\n\u003cbr\u003eWire capacity is up to .020\" (.51 mm), appropriate for initial-phase round wires, light retainer springs, and auxiliary wire components. For intermediate rectangular wires (0.017 × 0.025\" or 0.018 × 0.025\" stainless steel) and heavier gauges, the standard Bird Beak Pliers-2 is the correct instrument. The flat square beak remains functional for forming stops and step bends in light wire. Box joint construction maintains jaw alignment. Spring-return handles allow continuous loop-forming without manual reopening. Medical-grade stainless steel, autoclavable.\u003c\/p\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751016005946,"sku":"RT152","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/RT152-Light-Wire-Bird-Beak-Plier.webp?v=1792584672"},{"product_id":"surgiworld-three-jaw-pliers-rt156","title":"SurgiWorld – Three Jaw Pliers","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Three Jaw Pliers are used to create uniform 90 degree bends or V-stops in round and rectangular wires, with minimal hand pressure.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eThe three jaw design bends the wire against a fixed point, so each bend lands in the same place and at the same angle. That makes repeated bends, such as stops and loops, consistent from one wire to the next.\u003c\/p\u003e\u003cp\u003ePlace the wire between the jaws, position the bend and squeeze. Check the bend against the intended location before moving on.\u003c\/p\u003e\u003ch4\u003eCare and Handling\u003c\/h4\u003e\u003cp\u003eOrthodontic pliers should be used only for the job they are made for. Check that the tips meet evenly before each use, and do not use these pliers to cut wire, which will damage the working surfaces. Keep the box joint free of resin and cement, and put a drop of instrument lubricant on it before sterilization so the pliers keep opening and closing smoothly.\u003c\/p\u003e\u003cp\u003eRun a cloth or brush over serrations and grooves during cleaning, because debris trapped there reduces grip.\u003c\/p\u003e\u003cp\u003ePliers stored loose in a drawer can knock their tips out of alignment. Keep them in a cassette or tray so the beaks are protected between uses and the instrument is ready when the next patient sits down.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eMakes uniform 90 degree bends\u003c\/li\u003e\n\u003cli\u003eForms V-stops in round and rectangular wires\u003c\/li\u003e\n\u003cli\u003eThree jaw design for consistent results\u003c\/li\u003e\n\u003cli\u003eMinimal hand pressure\u003c\/li\u003e\n\u003cli\u003eRepeatable bend position\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751016202554,"sku":"RT156","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Three-Jaw-Pliers.webp?v=1792584673"},{"product_id":"surgiworld-arch-bending-pliers-rt162","title":"SurgiWorld – Arch Bending Pliers","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Arch Bending Pliers are for heavy-duty archwire shaping. They give the leverage needed to contour or torque rectangular wires while holding the wire flat and secure.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eRectangular wires are stiff and will rotate in a weak grip. These pliers hold the wire flat in the beaks, so you can add a contour or apply torque without the wire turning.\u003c\/p\u003e\u003cp\u003eMake adjustments in small steps and check the wire against an arch form between bends.\u003c\/p\u003e\u003ch4\u003eCare and Handling\u003c\/h4\u003e\u003cp\u003eOrthodontic pliers should be used only for the job they are made for. Check that the tips meet evenly before each use, and do not use these pliers to cut wire, which will damage the working surfaces. Keep the box joint free of resin and cement, and put a drop of instrument lubricant on it before sterilization so the pliers keep opening and closing smoothly.\u003c\/p\u003e\u003cp\u003eRun a cloth or brush over serrations and grooves during cleaning, because debris trapped there reduces grip.\u003c\/p\u003e\u003cp\u003ePliers stored loose in a drawer can knock their tips out of alignment. Keep them in a cassette or tray so the beaks are protected between uses and the instrument is ready when the next patient sits down.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eLeverage for contouring and torquing rectangular wires\u003c\/li\u003e\n\u003cli\u003eFlat, secure hold on the wire\u003c\/li\u003e\n\u003cli\u003eHeavy-duty archwire shaping\u003c\/li\u003e\n\u003cli\u003eFor round and rectangular wires\u003c\/li\u003e\n\u003cli\u003eControlled adjustment\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751016235322,"sku":"RT162","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Arch-Bending-Pliers.jpg?v=1792584675"},{"product_id":"surgiworld-bracket-removing-pliers-rt231","title":"SurgiWorld – Bracket Removing Pliers","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Bracket Removing Pliers have sharp tips that slide under the bracket base and peel it away from the enamel. They are used to remove bonded brackets at the end of treatment or to replace one that is misplaced.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eThe tips slide easily under the bracket base, so the bracket releases quickly and cleanly with a controlled peeling movement. A quick, clean release is more comfortable for the patient than slow pressure on the tooth.\u003c\/p\u003e\u003cp\u003ePlace the tips at the bracket base, squeeze gently and support the tooth with your other hand. Keep the force along the base of the bracket.\u003c\/p\u003e\u003ch4\u003eCare and Handling\u003c\/h4\u003e\u003cp\u003eOrthodontic pliers should be used only for the job they are made for. Check that the tips meet evenly before each use, and do not use these pliers to cut wire, which will damage the working surfaces. Keep the box joint free of resin and cement, and put a drop of instrument lubricant on it before sterilization so the pliers keep opening and closing smoothly.\u003c\/p\u003e\u003cp\u003eRun a cloth or brush over serrations and grooves during cleaning, because debris trapped there reduces grip.\u003c\/p\u003e\u003cp\u003ePliers stored loose in a drawer can knock their tips out of alignment. Keep them in a cassette or tray so the beaks are protected between uses and the instrument is ready when the next patient sits down.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eSharp tips that slide under the bracket base\u003c\/li\u003e\n\u003cli\u003ePeels brackets from the enamel quickly and cleanly\u003c\/li\u003e\n\u003cli\u003eFor end-of-treatment removal and bracket replacement\u003c\/li\u003e\n\u003cli\u003eDesigned for patient comfort\u003c\/li\u003e\n\u003cli\u003eStraight-handled design\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751016268090,"sku":"RT231","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Bracket-Removing-Pliers.webp?v=1792584677"},{"product_id":"surgiworld-adhesive-removing-pliers-rt233","title":"SurgiWorld – Adhesive Removing Pliers","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Adhesive Removing Pliers are used at the finishing appointment to remove leftover bonding resin. A plastic pad protects the tooth while the blade lifts the adhesive away.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eAfter brackets are debonded, composite remains on the enamel. These pliers close the blade against the plastic pad, so the blade removes resin while the pad takes the opposing force instead of the enamel surface.\u003c\/p\u003e\u003cp\u003eWork around the tooth in small bites, and use the pliers only on adhesive. A final polishing step will smooth any residue.\u003c\/p\u003e\u003ch4\u003eCare and Handling\u003c\/h4\u003e\u003cp\u003eOrthodontic pliers should be used only for the job they are made for. Check that the tips meet evenly before each use, and do not use these pliers to cut wire, which will damage the working surfaces. Keep the box joint free of resin and cement, and put a drop of instrument lubricant on it before sterilization so the pliers keep opening and closing smoothly.\u003c\/p\u003e\u003cp\u003eRun a cloth or brush over serrations and grooves during cleaning, because debris trapped there reduces grip.\u003c\/p\u003e\u003cp\u003ePliers stored loose in a drawer can knock their tips out of alignment. Keep them in a cassette or tray so the beaks are protected between uses and the instrument is ready when the next patient sits down.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003ePlastic pad protects the tooth surface\u003c\/li\u003e\n\u003cli\u003eBlade lifts leftover bonding resin\u003c\/li\u003e\n\u003cli\u003eFor debonding and finishing appointments\u003c\/li\u003e\n\u003cli\u003eControlled removal in small sections\u003c\/li\u003e\n\u003cli\u003eEasy squeeze action\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751016300858,"sku":"RT233","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Adhesive-Removing-Pliers.webp?v=1792584678"},{"product_id":"surgiworld-posterior-band-remover-rt234","title":"SurgiWorld – Posterior Band Remover","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Posterior Band Remover is a lever-action tool for removing molar bands. The padded tip rests on the occlusal surface while the hook catches the band edge, so the band can be lifted off with little effort.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eThe padded tip protects the biting surface and spreads the force. The hook engages the cervical edge of the band, and squeezing the handle lifts the band away from the tooth.\u003c\/p\u003e\u003cp\u003ePlace the pad on the occlusal surface and engage the hook under the band margin, then squeeze gradually. Clean any remaining cement from the tooth afterward.\u003c\/p\u003e\u003ch4\u003eCare and Handling\u003c\/h4\u003e\u003cp\u003eOrthodontic pliers should be used only for the job they are made for. Check that the tips meet evenly before each use, and do not use these pliers to cut wire, which will damage the working surfaces. Keep the box joint free of resin and cement, and put a drop of instrument lubricant on it before sterilization so the pliers keep opening and closing smoothly.\u003c\/p\u003e\u003cp\u003eRun a cloth or brush over serrations and grooves during cleaning, because debris trapped there reduces grip.\u003c\/p\u003e\u003cp\u003ePliers stored loose in a drawer can knock their tips out of alignment. Keep them in a cassette or tray so the beaks are protected between uses and the instrument is ready when the next patient sits down.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eLever-action design for removing molar bands\u003c\/li\u003e\n\u003cli\u003ePadded tip rests on the occlusal surface\u003c\/li\u003e\n\u003cli\u003eHook catches the band edge\u003c\/li\u003e\n\u003cli\u003eFor posterior band removal\u003c\/li\u003e\n\u003cli\u003eReduces force on the tooth\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751016530234,"sku":"RT234","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Posterior-Band-Remover.webp?v=1792584680"},{"product_id":"surgiworld-band-seating-pliers-rt261","title":"SurgiWorld – Band Seating Pliers","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Band Seating Pliers use the patient's own biting force to seat molar bands. The serrated tip prevents slipping, which gives a tight, accurate fit.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eThe patient bites down on the pliers' tip, so the seating force comes from the jaw and is spread across the occlusal surface of the band. This is more comfortable for the patient than pressing the band down from the side.\u003c\/p\u003e\u003cp\u003eCheck that the tip sits on the band edge and not on the tooth, and have the patient bite slowly until the band is fully seated.\u003c\/p\u003e\u003ch4\u003eSeating Bands Well\u003c\/h4\u003e\u003cp\u003eA well seated band starts with the right fit. Try the band on, press it down with the pusher or bite stick until it sits at the correct height on the crown, and check that it clears the opposing tooth in occlusion before it is cemented. Excess cement should be cleaned from the margins before it sets, because it traps plaque and irritates the gingiva.\u003c\/p\u003e\u003cp\u003eKeep the instrument tip clean between bands. Cement or resin on a pusher makes it slip and can scratch the band surface.\u003c\/p\u003e\u003cp\u003eKeep a spare pusher or bite stick available for the day, because instruments are sterilized between patients and a banding appointment can use several bands in one visit.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eSeats bands using the patient's own biting force\u003c\/li\u003e\n\u003cli\u003eSerrated tip to prevent slipping\u003c\/li\u003e\n\u003cli\u003eTight, accurate band fit\u003c\/li\u003e\n\u003cli\u003eComfortable for the patient\u003c\/li\u003e\n\u003cli\u003eFor molar bands\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751016563002,"sku":"RT261","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Band-Seating-Pliers.webp?v=1792584681"},{"product_id":"surgiworld-band-crimping-pliers-rt262","title":"SurgiWorld – Band Crimping Pliers","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Band Crimping Pliers are used to custom fit molar bands. They crimp the cervical edges of the band to create a snug seal that prevents cement wash-out.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eA band that stands off the tooth at the cervical margin lets saliva reach the cement and wash it out. Crimping brings the edge in against the tooth, so the band closes against the enamel.\u003c\/p\u003e\u003cp\u003eCrimp the margin a little at a time, check the fit and make sure the edge is not so tight that the band will not seat.\u003c\/p\u003e\u003ch4\u003eCare and Handling\u003c\/h4\u003e\u003cp\u003eOrthodontic pliers should be used only for the job they are made for. Check that the tips meet evenly before each use, and do not use these pliers to cut wire, which will damage the working surfaces. Keep the box joint free of resin and cement, and put a drop of instrument lubricant on it before sterilization so the pliers keep opening and closing smoothly.\u003c\/p\u003e\u003cp\u003eRun a cloth or brush over serrations and grooves during cleaning, because debris trapped there reduces grip.\u003c\/p\u003e\u003cp\u003ePliers stored loose in a drawer can knock their tips out of alignment. Keep them in a cassette or tray so the beaks are protected between uses and the instrument is ready when the next patient sits down.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eCrimps the cervical edge of molar bands\u003c\/li\u003e\n\u003cli\u003eCreates a snug seal against the tooth\u003c\/li\u003e\n\u003cli\u003eHelps prevent cement wash-out\u003c\/li\u003e\n\u003cli\u003eFor a custom band fit\u003c\/li\u003e\n\u003cli\u003eControlled, gradual adjustment\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751016628538,"sku":"RT262","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Band-Crimping-Pliers.webp?v=1792584683"},{"product_id":"surgiworld-crown-band-contouring-rt264","title":"SurgiWorld – Crown \u0026 Band Contouring","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Crown and Band Contouring Pliers have a convex and concave design for reshaping stainless steel crowns or molar bands to match the natural anatomy of the tooth.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eA band or crown that is too flat will not follow the curves of the tooth. The convex beak and concave beak work together to bend the metal inward or outward, adjusting the contour until it matches the tooth.\u003c\/p\u003e\u003cp\u003eReshape in small increments and try the band or crown on regularly rather than making one large adjustment.\u003c\/p\u003e\u003ch4\u003eCare and Handling\u003c\/h4\u003e\u003cp\u003eOrthodontic pliers should be used only for the job they are made for. Check that the tips meet evenly before each use, and do not use these pliers to cut wire, which will damage the working surfaces. Keep the box joint free of resin and cement, and put a drop of instrument lubricant on it before sterilization so the pliers keep opening and closing smoothly.\u003c\/p\u003e\u003cp\u003eRun a cloth or brush over serrations and grooves during cleaning, because debris trapped there reduces grip.\u003c\/p\u003e\u003cp\u003ePliers stored loose in a drawer can knock their tips out of alignment. Keep them in a cassette or tray so the beaks are protected between uses and the instrument is ready when the next patient sits down.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eConvex and concave beaks for contouring metal\u003c\/li\u003e\n\u003cli\u003eFor stainless steel crowns and molar bands\u003c\/li\u003e\n\u003cli\u003eMatches the band or crown to natural tooth anatomy\u003c\/li\u003e\n\u003cli\u003eControlled, incremental shaping\u003c\/li\u003e\n\u003cli\u003eUseful in orthodontics and pediatric dentistry\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751016661306,"sku":"RT264","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Crown-Band-Contouring.webp?v=1792584685"},{"product_id":"surgiworld-general-contouring-pliers-rt267","title":"SurgiWorld – General Contouring Pliers","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe General Contouring Pliers are used for archwire shaping. The smooth-surfaced beaks form gentle curves in large wires without marking or scratching the metal.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eMarks and nicks on an archwire can weaken it and increase friction in the bracket slot. Smooth beaks let you bend a large wire into an arch or add a gentle contour without leaving a mark.\u003c\/p\u003e\u003cp\u003eHold the wire near the section you want to curve, roll it over the beak and check the shape against the arch form.\u003c\/p\u003e\u003ch4\u003eCare and Handling\u003c\/h4\u003e\u003cp\u003eOrthodontic pliers should be used only for the job they are made for. Check that the tips meet evenly before each use, and do not use these pliers to cut wire, which will damage the working surfaces. Keep the box joint free of resin and cement, and put a drop of instrument lubricant on it before sterilization so the pliers keep opening and closing smoothly.\u003c\/p\u003e\u003cp\u003eRun a cloth or brush over serrations and grooves during cleaning, because debris trapped there reduces grip.\u003c\/p\u003e\u003cp\u003ePliers stored loose in a drawer can knock their tips out of alignment. Keep them in a cassette or tray so the beaks are protected between uses and the instrument is ready when the next patient sits down.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eSmooth-surfaced beaks that do not mark the wire\u003c\/li\u003e\n\u003cli\u003eFor shaping archwires\u003c\/li\u003e\n\u003cli\u003eForms gentle curves in large wires\u003c\/li\u003e\n\u003cli\u003eGeneral contouring use\u003c\/li\u003e\n\u003cli\u003eHelps keep wires free of nicks\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751016694074,"sku":"RT267","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/General-Contouring-Pliers.webp?v=1792584686"},{"product_id":"surgiworld-force-module-separator-rt118","title":"SurgiWorld – Force Module Separator","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Force Module Separator is a high-leverage tool that stretches elastic separators so they can be slid between tight contacts before banding. The thin tips make quick placement easier.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eElastic separators are placed between teeth a few days before band placement to open the contact. The tool stretches the separator so it can be positioned between the contacts, then released so it holds in place.\u003c\/p\u003e\u003cp\u003eThe high-leverage design means less hand effort for each separator.\u003c\/p\u003e\u003ch4\u003eCare and Handling\u003c\/h4\u003e\u003cp\u003eOrthodontic pliers should be used only for the job they are made for. Check that the tips meet evenly before each use, and do not use these pliers to cut wire, which will damage the working surfaces. Keep the box joint free of resin and cement, and put a drop of instrument lubricant on it before sterilization so the pliers keep opening and closing smoothly.\u003c\/p\u003e\u003cp\u003eRun a cloth or brush over serrations and grooves during cleaning, because debris trapped there reduces grip.\u003c\/p\u003e\u003cp\u003ePliers stored loose in a drawer can knock their tips out of alignment. Keep them in a cassette or tray so the beaks are protected between uses and the instrument is ready when the next patient sits down.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eStretches elastic separators for placement\u003c\/li\u003e\n\u003cli\u003eThin tips slide between tight contacts\u003c\/li\u003e\n\u003cli\u003eHigh leverage for less hand effort\u003c\/li\u003e\n\u003cli\u003eFor pre-banding separator placement\u003c\/li\u003e\n\u003cli\u003eQuick, controlled use\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751016726842,"sku":"RT118","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Force-Module-Separator.webp?v=1792584688"},{"product_id":"surgiworld-bracket-removing-plier-angled-rt237","title":"SurgiWorld – Bracket Removing Plier Angled","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Bracket Removing Plier, Angled, is used to remove bonded brackets at the end of treatment or when a bracket needs replacing. The 60 degree angled head gives a better line of sight and easier access to posterior brackets than straight-handled removal tools.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eRemoving a bonded bracket means applying controlled pressure to peel it from the enamel, so access matters most on the back teeth. The angle puts the beaks where they can reach premolar and molar brackets without twisting your wrist.\u003c\/p\u003e\u003cp\u003eSqueeze gently and peel the bracket away, supporting the tooth with your other hand, and keep the force along the bracket base rather than twisting.\u003c\/p\u003e\u003ch4\u003eCare and Handling\u003c\/h4\u003e\u003cp\u003eOrthodontic pliers should be used only for the job they are made for. Check that the tips meet evenly before each use, and do not use these pliers to cut wire, which will damage the working surfaces. Keep the box joint free of resin and cement, and put a drop of instrument lubricant on it before sterilization so the pliers keep opening and closing smoothly.\u003c\/p\u003e\u003cp\u003eRun a cloth or brush over serrations and grooves during cleaning, because debris trapped there reduces grip.\u003c\/p\u003e\u003cp\u003ePliers stored loose in a drawer can knock their tips out of alignment. Keep them in a cassette or tray so the beaks are protected between uses and the instrument is ready when the next patient sits down.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003e60 degree angled head for access to posterior brackets\u003c\/li\u003e\n\u003cli\u003eBetter line of sight than straight removers\u003c\/li\u003e\n\u003cli\u003eFor bonded bracket removal and replacement\u003c\/li\u003e\n\u003cli\u003eControlled peeling action\u003c\/li\u003e\n\u003cli\u003eReduces wrist strain on posterior teeth\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751016759610,"sku":"RT237","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Bracket-Removing-Plier-Angled.webp?v=1792584690"},{"product_id":"surgiworld-weingart-pliers-rt111","title":"SurgiWorld – Weingart Pliers","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Weingart Pliers are a versatile utility instrument for orthodontic clinics. The curved, serrated tips give a non-slip grip for placing and removing archwires.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eThe tips are curved and serrated so you can hold a wire close to the tooth and guide it into the bracket slot or around the molar tube. They are also used to retrieve a wire during removal.\u003c\/p\u003e\u003cp\u003eThe curved tip keeps your hand out of the line of sight, and the serrations stop the wire from rotating while you work.\u003c\/p\u003e\u003ch4\u003eCare and Handling\u003c\/h4\u003e\u003cp\u003eOrthodontic pliers should be used only for the job they are made for. Check that the tips meet evenly before each use, and do not use these pliers to cut wire, which will damage the working surfaces. Keep the box joint free of resin and cement, and put a drop of instrument lubricant on it before sterilization so the pliers keep opening and closing smoothly.\u003c\/p\u003e\u003cp\u003eRun a cloth or brush over serrations and grooves during cleaning, because debris trapped there reduces grip.\u003c\/p\u003e\u003cp\u003ePliers stored loose in a drawer can knock their tips out of alignment. Keep them in a cassette or tray so the beaks are protected between uses and the instrument is ready when the next patient sits down.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eCurved, serrated tips for a non-slip grip\u003c\/li\u003e\n\u003cli\u003ePlaces and removes archwires with full control\u003c\/li\u003e\n\u003cli\u003eVersatile utility pliers\u003c\/li\u003e\n\u003cli\u003eStandard Weingart pattern\u003c\/li\u003e\n\u003cli\u003eUseful for wire retrieval and placement\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751017021754,"sku":"RT111","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Weingart-Pliers.webp?v=1792584692"},{"product_id":"surgiworld-ligature-director-ligature-tucker-rt811","title":"SurgiWorld – Ligature Director \u0026 Ligature Tucker","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Ligature Director and Ligature Tucker is a dual-purpose tool for tucking pigtails and directing ligature wires under the wings of the tie. A slim profile gives easy access in crowded arches.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eAfter a wire ligature is twisted, a pigtail remains. The tucker end pushes it under the arch, away from the cheeks and lips, and the director end guides the wire under the tie wings.\u003c\/p\u003e\u003cp\u003eThe slim profile reaches between the teeth where wider tools do not fit.\u003c\/p\u003e\u003ch4\u003eWorking With Ligatures\u003c\/h4\u003e\u003cp\u003eLigature wires and elastic ties are finished by making sure nothing sharp is left in the mouth. Tuck wire tails under the arch, away from the cheeks and lips, and run the tip along the bracket to check that elastic ties are fully seated under the wings.\u003c\/p\u003e\u003cp\u003eClean the working tip after every patient. Dried elastomeric debris or cement on the tip makes it harder to feel the wire and bracket.\u003c\/p\u003e\u003cp\u003eA ligature director is a small instrument, but it is used at nearly every adjustment visit. Keeping a few on the tray means one is always clean and ready while the others are being reprocessed, so chair time is not lost waiting for an instrument.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eLigature tucker end for pigtails\u003c\/li\u003e\n\u003cli\u003eLigature director end for guiding wires under tie wings\u003c\/li\u003e\n\u003cli\u003eSlim profile for crowded arches\u003c\/li\u003e\n\u003cli\u003eTwo functions in one instrument\u003c\/li\u003e\n\u003cli\u003eLeaves wire ends tucked and comfortable for the patient\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751017087290,"sku":"RT811","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Ligature-Director-Ligature-Tucker.webp?v=1792584693"},{"product_id":"surgiworld-ligature-director-plugger-rt812","title":"SurgiWorld – Ligature Director \u0026 Plugger","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Ligature Director and Plugger combines wire placement with a plugger tip for seating bands or packing material. It is useful for multi-tasking during routine brace adjustments.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eOne end directs ligature wires and tucks tails. The other end is a plugger, which can press a band into place or pack material where it is needed.\u003c\/p\u003e\u003cp\u003eHaving both tools on one handle reduces how often you reach for another instrument in the middle of an adjustment.\u003c\/p\u003e\u003ch4\u003eWorking With Ligatures\u003c\/h4\u003e\u003cp\u003eLigature wires and elastic ties are finished by making sure nothing sharp is left in the mouth. Tuck wire tails under the arch, away from the cheeks and lips, and run the tip along the bracket to check that elastic ties are fully seated under the wings.\u003c\/p\u003e\u003cp\u003eClean the working tip after every patient. Dried elastomeric debris or cement on the tip makes it harder to feel the wire and bracket.\u003c\/p\u003e\u003cp\u003eA ligature director is a small instrument, but it is used at nearly every adjustment visit. Keeping a few on the tray means one is always clean and ready while the others are being reprocessed, so chair time is not lost waiting for an instrument.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eLigature director end for wire placement\u003c\/li\u003e\n\u003cli\u003ePlugger end for seating bands or packing material\u003c\/li\u003e\n\u003cli\u003eTwo functions on one handle\u003c\/li\u003e\n\u003cli\u003eFor routine brace adjustments\u003c\/li\u003e\n\u003cli\u003eReduces instrument changes\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751017120058,"sku":"RT812","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Straight-Ligature-Director-Plugger.webp?v=1792584695"},{"product_id":"surgiworld-ligature-director-0-18-single-end-rt813","title":"SurgiWorld – Ligature Director 0.18\", Single End","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Ligature Director 0.18\", single end, is sized at 0.18 inch for fine wire control. It is used to guide ligature wire and seat elastic ties.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eThe single-end design gives a light, balanced feel in the hand, which helps you guide a wire with small, controlled movements. The 0.18 inch size suits work on small areas where a thicker tip would be clumsy.\u003c\/p\u003e\u003cp\u003eBecause there is only one working end, the handle is simple to hold and the tip is easy to keep clean.\u003c\/p\u003e\u003ch4\u003eWorking With Ligatures\u003c\/h4\u003e\u003cp\u003eLigature wires and elastic ties are finished by making sure nothing sharp is left in the mouth. Tuck wire tails under the arch, away from the cheeks and lips, and run the tip along the bracket to check that elastic ties are fully seated under the wings.\u003c\/p\u003e\u003cp\u003eClean the working tip after every patient. Dried elastomeric debris or cement on the tip makes it harder to feel the wire and bracket.\u003c\/p\u003e\u003cp\u003eA ligature director is a small instrument, but it is used at nearly every adjustment visit. Keeping a few on the tray means one is always clean and ready while the others are being reprocessed, so chair time is not lost waiting for an instrument.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003e0.18 inch tip size for fine wire control\u003c\/li\u003e\n\u003cli\u003eSingle-end design, balanced and lightweight\u003c\/li\u003e\n\u003cli\u003eFor guiding ligature wires and tucking tails\u003c\/li\u003e\n\u003cli\u003eControlled movements in small areas\u003c\/li\u003e\n\u003cli\u003eEasy to hold and clean\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751017152826,"sku":"RT813","price":49.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Ligature-Director-0.18_-Single-End.webp?v=1792584696"},{"product_id":"surgiworld-ligature-director-rt814","title":"SurgiWorld – Ligature Director","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Ligature Director is a basic orthodontic instrument for guiding ligature wires and elastic ties. The smooth tip is made to keep the patient comfortable while the wire is seated securely.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eThe smooth tip glides along the wire and slips under tie wings without catching on the bracket or scraping the soft tissue. It is used to guide a wire into the slot, tuck the end under the arch and seat an elastic tie.\u003c\/p\u003e\u003cp\u003eIt is a simple tool that nearly every orthodontic tray includes.\u003c\/p\u003e\u003ch4\u003eWorking With Ligatures\u003c\/h4\u003e\u003cp\u003eLigature wires and elastic ties are finished by making sure nothing sharp is left in the mouth. Tuck wire tails under the arch, away from the cheeks and lips, and run the tip along the bracket to check that elastic ties are fully seated under the wings.\u003c\/p\u003e\u003cp\u003eClean the working tip after every patient. Dried elastomeric debris or cement on the tip makes it harder to feel the wire and bracket.\u003c\/p\u003e\u003cp\u003eA ligature director is a small instrument, but it is used at nearly every adjustment visit. Keeping a few on the tray means one is always clean and ready while the others are being reprocessed, so chair time is not lost waiting for an instrument.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eSmooth tip for comfortable wire guiding\u003c\/li\u003e\n\u003cli\u003eFor ligature wires and elastic ties\u003c\/li\u003e\n\u003cli\u003eTucks wire ends away from the cheeks\u003c\/li\u003e\n\u003cli\u003eA basic tool on every orthodontic tray\u003c\/li\u003e\n\u003cli\u003eSlim for access in crowded arches\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751017218362,"sku":"RT814","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Ligature-Director.webp?v=1792584698"},{"product_id":"surgiworld-twirl-on-ligature-applicator-rt815","title":"SurgiWorld – Twirl-On Ligature Applicator","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Twirl-On Ligature Applicator is used to apply elastic ligatures. It streamlines placement and speeds up the ligating process, which helps during busy clinic days.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eThe twirl-on action reduces hand fatigue compared with placing each elastic by hand, because the movement is smoother and uses less finger force. Over a full schedule of adjustment patients, that adds up.\u003c\/p\u003e\u003cp\u003eLoad the elastic, position it over the bracket and twirl it on, then check that it is seated under the wings.\u003c\/p\u003e\u003ch4\u003eWorking With Ligatures\u003c\/h4\u003e\u003cp\u003eLigature wires and elastic ties are finished by making sure nothing sharp is left in the mouth. Tuck wire tails under the arch, away from the cheeks and lips, and run the tip along the bracket to check that elastic ties are fully seated under the wings.\u003c\/p\u003e\u003cp\u003eClean the working tip after every patient. Dried elastomeric debris or cement on the tip makes it harder to feel the wire and bracket.\u003c\/p\u003e\u003cp\u003eA ligature director is a small instrument, but it is used at nearly every adjustment visit. Keeping a few on the tray means one is always clean and ready while the others are being reprocessed, so chair time is not lost waiting for an instrument.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eTwirl-on action for placing elastic ligatures\u003c\/li\u003e\n\u003cli\u003eReduces hand fatigue\u003c\/li\u003e\n\u003cli\u003eSpeeds up ligating on busy days\u003c\/li\u003e\n\u003cli\u003eFor elastic ligature ties on brackets\u003c\/li\u003e\n\u003cli\u003eEasy to clean between patients\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751017283898,"sku":"RT815","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Twirl-On-Ligature-Applicator.webp?v=1792584700"},{"product_id":"surgiworld-ligature-director-straight-v-shape-rt816","title":"SurgiWorld – Ligature Director Straight \u0026 V-shape","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Ligature Director, straight and V-shape, has a different tip at each end. The straight end is for general use, and the V-shape notched end gives a better grip on wires.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eThe straight end directs ligature wire and elastic ties into position and tucks wire tails. The V-shape notch hooks over a wire, which helps when you need to hold or guide it.\u003c\/p\u003e\u003cp\u003eThat variety makes it useful with different bracket types, and it means one instrument can cover most ligature directing jobs during an adjustment visit.\u003c\/p\u003e\u003ch4\u003eWorking With Ligatures\u003c\/h4\u003e\u003cp\u003eLigature wires and elastic ties are finished by making sure nothing sharp is left in the mouth. Tuck wire tails under the arch, away from the cheeks and lips, and run the tip along the bracket to check that elastic ties are fully seated under the wings.\u003c\/p\u003e\u003cp\u003eClean the working tip after every patient. Dried elastomeric debris or cement on the tip makes it harder to feel the wire and bracket.\u003c\/p\u003e\u003cp\u003eA ligature director is a small instrument, but it is used at nearly every adjustment visit. Keeping a few on the tray means one is always clean and ready while the others are being reprocessed, so chair time is not lost waiting for an instrument.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eStraight end for general ligature directing\u003c\/li\u003e\n\u003cli\u003eV-shape notched end for a better grip on wires\u003c\/li\u003e\n\u003cli\u003eDouble-ended for versatility\u003c\/li\u003e\n\u003cli\u003eWorks with various bracket types\u003c\/li\u003e\n\u003cli\u003eFor tucking wire tails and seating ties\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751017316666,"sku":"RT816","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Ligature-Director-Straight-V-shape.webp?v=1792584701"},{"product_id":"surgiworld-band-pusher-rt817","title":"SurgiWorld – Band Pusher","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Band Pusher is used to seat orthodontic bands. The serrated tip is designed to stop it slipping off the band edge, and it gives the leverage needed for a tight, anatomical fit.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eA band that is not fully seated leaves a gap at the margin where cement washes out and plaque collects. The serrated tip bites on the edge of the band so the pressure goes down along the tooth instead of sliding sideways.\u003c\/p\u003e\u003cp\u003ePlace the tip on the band edge, push toward the gingiva with firm, even pressure, and work around the band until it sits at the correct height.\u003c\/p\u003e\u003ch4\u003eSeating Bands Well\u003c\/h4\u003e\u003cp\u003eA well seated band starts with the right fit. Try the band on, press it down with the pusher or bite stick until it sits at the correct height on the crown, and check that it clears the opposing tooth in occlusion before it is cemented. Excess cement should be cleaned from the margins before it sets, because it traps plaque and irritates the gingiva.\u003c\/p\u003e\u003cp\u003eKeep the instrument tip clean between bands. Cement or resin on a pusher makes it slip and can scratch the band surface.\u003c\/p\u003e\u003cp\u003eKeep a spare pusher or bite stick available for the day, because instruments are sterilized between patients and a banding appointment can use several bands in one visit.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eSerrated tip to prevent slipping on the band edge\u003c\/li\u003e\n\u003cli\u003eLeverage for a tight, anatomical fit\u003c\/li\u003e\n\u003cli\u003eSingle-purpose band pusher\u003c\/li\u003e\n\u003cli\u003eFor molar and premolar bands\u003c\/li\u003e\n\u003cli\u003eFirm, controlled seating pressure\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751017349434,"sku":"RT817","price":99.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Band-Pusher.webp?v=1792584703"},{"product_id":"surgiworld-band-pusher-scaler-rt818","title":"SurgiWorld – Band Pusher \u0026 Scaler","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Band Pusher and Scaler is a hybrid instrument for seating bands and then removing excess cement or flash. It saves the time spent switching between two instruments.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eOne end seats the band, and the scaler end removes cement or flash as soon as the band is in place. That order matters, because excess cement is easiest to remove cleanly before it fully sets.\u003c\/p\u003e\u003cp\u003eThe double-ended design keeps both tools in one hand during the banding stage of an appointment.\u003c\/p\u003e\u003ch4\u003eSeating Bands Well\u003c\/h4\u003e\u003cp\u003eA well seated band starts with the right fit. Try the band on, press it down with the pusher or bite stick until it sits at the correct height on the crown, and check that it clears the opposing tooth in occlusion before it is cemented. Excess cement should be cleaned from the margins before it sets, because it traps plaque and irritates the gingiva.\u003c\/p\u003e\u003cp\u003eKeep the instrument tip clean between bands. Cement or resin on a pusher makes it slip and can scratch the band surface.\u003c\/p\u003e\u003cp\u003eKeep a spare pusher or bite stick available for the day, because instruments are sterilized between patients and a banding appointment can use several bands in one visit.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eBand pusher end for seating molar bands\u003c\/li\u003e\n\u003cli\u003eScaler end to remove excess cement or flash\u003c\/li\u003e\n\u003cli\u003eHybrid design saves instrument changes\u003c\/li\u003e\n\u003cli\u003eCleanup immediately after seating\u003c\/li\u003e\n\u003cli\u003eSuited to routine banding appointments\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751017382202,"sku":"RT818","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Band-Pusher-Scaler.webp?v=1792584704"},{"product_id":"surgiworld-high-heat-bite-stick-rt819","title":"SurgiWorld – High Heat Bite Stick","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe High Heat Bite Stick is used to seat orthodontic bands with the patient's own biting force. The patient bites on the stick, and the force pushes the band down onto the tooth.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eUsing the patient's own biting force gives an even seating pressure and is comfortable, because the load is spread across the occlusal surface instead of coming from one point. It also leaves your hands free to hold the band in position.\u003c\/p\u003e\u003cp\u003eThe high heat construction is made to withstand repeated autoclave cycles, so it can be sterilized between patients without losing its shape.\u003c\/p\u003e\u003ch4\u003eSeating Bands Well\u003c\/h4\u003e\u003cp\u003eA well seated band starts with the right fit. Try the band on, press it down with the pusher or bite stick until it sits at the correct height on the crown, and check that it clears the opposing tooth in occlusion before it is cemented. Excess cement should be cleaned from the margins before it sets, because it traps plaque and irritates the gingiva.\u003c\/p\u003e\u003cp\u003eKeep the instrument tip clean between bands. Cement or resin on a pusher makes it slip and can scratch the band surface.\u003c\/p\u003e\u003cp\u003eKeep a spare pusher or bite stick available for the day, because instruments are sterilized between patients and a banding appointment can use several bands in one visit.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eBuilt to withstand repeated autoclaving. Clean it after each patient, dry it fully, and replace it if the biting surface becomes cracked or worn.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eSeats bands using the patient's own biting force\u003c\/li\u003e\n\u003cli\u003eBuilt to withstand repeated autoclaving\u003c\/li\u003e\n\u003cli\u003eComfortable for the patient\u003c\/li\u003e\n\u003cli\u003eEven seating pressure across the band\u003c\/li\u003e\n\u003cli\u003eLeaves your hands free to guide the band\u003c\/li\u003e\n\u003cli\u003eReusable between patients after sterilization\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751017447738,"sku":"RT819","price":39.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/High-Heat-Bite-Stick.webp?v=1792584706"},{"product_id":"surgiworld-direct-bond-adhesive-remover-scaler-rt820","title":"SurgiWorld – Direct Bond Adhesive Remover \u0026 Scaler","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Direct Bond Adhesive Remover and Scaler is used after debonding to lift residual adhesive from the tooth surface. The scaler tip is suited to fine cleanup near the gingival margin.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eAfter brackets are removed, leftover composite adhesive stays on the enamel. This double-ended instrument lets you lift the bulk of the adhesive with the remover end, then clean the area near the gum line with the scaler end.\u003c\/p\u003e\u003cp\u003eWork with light pressure and short strokes, and finish the surface with a polishing step so the enamel is left smooth. The remover is for adhesive, not enamel, so avoid scraping the tooth.\u003c\/p\u003e\u003ch4\u003eUse and Care\u003c\/h4\u003e\u003cp\u003eOrthodontic hand instruments are handled all day with wet gloves, so a clean, secure grip matters. Wipe off bonding resin and cement before it hardens, and clean serrations with a brush before the instrument goes into the ultrasonic bath and autoclave.\u003c\/p\u003e\u003cp\u003eCheck the tips for wear or bending each week, because a damaged tip can scratch enamel, brackets or bands.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eAdhesive remover end for residual bonding material after debonding\u003c\/li\u003e\n\u003cli\u003eScaler tip for fine cleanup near the gingival margin\u003c\/li\u003e\n\u003cli\u003eDouble-ended, two cleanup stages on one handle\u003c\/li\u003e\n\u003cli\u003eFor direct bonded brackets and attachments\u003c\/li\u003e\n\u003cli\u003eEfficient lifting of adhesive from tooth surfaces\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751017546042,"sku":"RT820","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Direct-Bond-Adhesive-Remover-Scaler.webp?v=1792584709"},{"product_id":"surgiworld-band-seater-scaler-rt821","title":"SurgiWorld – Band Seater \u0026 Scaler","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Band Seater and Scaler is a double-ended instrument for the banding and bonding phase. One end has a rugged tip for pushing bands into place, and the other has a sharp scaler for finishing.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eSeating and cleanup are done with the same handle, so you can seat the band, then turn the instrument over and use the scaler to remove excess cement from the margins, with no instrument swap in between.\u003c\/p\u003e\u003cp\u003eThe pushing tip is built for firm, repeated pressure on the band edge. The scaler end is sharp, so use it with light strokes near the gingival margin.\u003c\/p\u003e\u003ch4\u003eSeating Bands Well\u003c\/h4\u003e\u003cp\u003eA well seated band starts with the right fit. Try the band on, press it down with the pusher or bite stick until it sits at the correct height on the crown, and check that it clears the opposing tooth in occlusion before it is cemented. Excess cement should be cleaned from the margins before it sets, because it traps plaque and irritates the gingiva.\u003c\/p\u003e\u003cp\u003eKeep the instrument tip clean between bands. Cement or resin on a pusher makes it slip and can scratch the band surface.\u003c\/p\u003e\u003cp\u003eKeep a spare pusher or bite stick available for the day, because instruments are sterilized between patients and a banding appointment can use several bands in one visit.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eRugged band seating tip\u003c\/li\u003e\n\u003cli\u003eSharp scaler end for finishing and cement cleanup\u003c\/li\u003e\n\u003cli\u003eTwo functions on one handle\u003c\/li\u003e\n\u003cli\u003eImproves workflow during banding and bonding\u003c\/li\u003e\n\u003cli\u003eFor molar bands and other fixed appliance work\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751017578810,"sku":"RT821","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Band-Seater-Scaler.webp?v=1792584712"},{"product_id":"surgiworld-angulated-bracket-removing-pliers-rt238","title":"SurgiWorld – Angulated Bracket Removing Pliers","description":"\u003cp\u003eAt the end of fixed appliance treatment, bracket removal is one of the highest-risk steps for enamel surface damage. Poorly controlled debonding force,  whether from an instrument that doesn't fit the tooth angulation or one that requires excessive squeeze to generate shear, increases the likelihood of enamel fracture, bracket base remnants, and patient discomfort. The Angulated Bracket Removing Pliers address this by combining a high-angle working tip with a lever geometry engineered to deliver focused peel force precisely at the bracket–enamel interface.\u003cbr\u003e\n\n\u003cbr\u003eThe angulated design gives the clinician direct access to posterior brackets without bending the patient's head position or distorting soft tissue for visibility. The high-angle tip seats against the gingival and occlusal tie wings of the bracket simultaneously, ensuring the force vector runs along the adhesive bond plane rather than across enamel. This is particularly relevant for ceramic and plastic brackets, which require a controlled debonding force vector to avoid cohesive bracket fracture that leaves base fragments on the tooth.\u003cbr\u003e\n\n\u003cbr\u003eThe plier is constructed from medical-grade stainless steel, with working tips that maintain their geometry through repeated autoclave cycles. The slim tip profile also assists access in patients with limited interarch clearance or crowded posterior dentition. After debonding, residual adhesive removal is a separate step; these pliers are optimized for the bracket removal stage only and work alongside adhesive removing instruments and polishing burs in a complete debonding sequence. Compatible with all standard direct-bond bracket systems including self-ligating, twin, single, and mini bracket designs in stainless steel, ceramic, and polycarbonate.\u003c\/p\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751022362938,"sku":"RT238","price":189.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/RT-238-Angulated-Bracket-Removing-Pliers.webp?v=1792584801"},{"product_id":"surgiworld-micro-cutter-pin-ligature-rt711","title":"SurgiWorld – Micro Cutter Pin \u0026 Ligature","description":"Ligature wire management is a recurring task across every orthodontic adjustment appointment. After tying stainless steel ligature wire around bracket wings, the protruding twisted tail must be cut short and tucked, a step that requires a cutter with a tip narrow enough to enter the interproximal space, fine enough to position flush against the bracket without engaging adjacent brackets or teeth, and sharp enough to cut cleanly through the twisted wire without distorting it.\u003cbr\u003e\u003cbr\u003eThe Micro Cutter Pin \u0026amp; Ligature provides the slim profile required for this. The ultra-slim body and pointed tapered tips allow the clinician to direct the cutting edge to exactly where the wire needs to be severed, close to the bracket wing, at the base of a ligature knot, or at the tip of a small-gauge auxiliary spring, without the bulkier body of a standard-size cutter blocking the approach angle. This is particularly relevant in the anterior region, where interproximal spaces are narrow, and in the posterior region, where the buccal tube limits how far distal the cutter can reach without bending.\u003cbr\u003e\u003cbr\u003eWire capacity is up to .012\" (.30 mm), appropriate for standard stainless steel ligature wire, soft wire pins, and fine auxiliary wire components. The cutting edges are hardened to maintain sharpness through the volume of ligature cuts expected in a high-patient-day orthodontic practice. The instrument is not designed for archwire cutting or hard wire sections; a separate hard wire cutter or distal end cutter handles those tasks. Stainless steel construction, fully autoclavable, standard handle length. For patients with limited mouth opening or when reaching second molar brackets requires additional instrument length, the Micro Cutter Pin \u0026amp; Ligature, Long provides extended reach with the same tip geometry.","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751022395706,"sku":"RT711","price":189.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/RT711-Micro-Cutter-Pin-Ligature.webp?v=1792584802"},{"product_id":"surgiworld-universal-cut-and-hold-distal-end-cutter-rt712","title":"SurgiWorld – Universal Cut and Hold Distal End Cutter","description":"\u003cp\u003eAfter seating an archwire through the brackets and engaging the last molar buccal tube, the distal excess wire extending beyond the tube must be cut. The trimmed segment, even a short tail of 1–3 mm, is a sharp metal piece that will irritate buccal mucosa if left long, or become a loose foreign body in the mouth if the cutter does not retain it after severing. Standard wire cutters that simply cut and release require the operator to immediately retrieve the trimmed piece from the oral cavity before the patient closes, a step that is easy to miss in a busy adjustment sequence.\u003cbr\u003e\n\n\u003cbr\u003eThe Universal Cut and Hold Distal End Cutter eliminates this retrieval step. The instrument incorporates a working-end retention mechanism, a silicone or mechanical grip within the tip, that holds the cut segment after the blades pass through the wire, keeping the trimmed piece captured until the instrument is withdrawn from the mouth and the tip is cleared over a bracket tray. This is the safety function that makes this design the standard distal end cutter in modern orthodontic practice rather than a conventional wire cutter.\u003cbr\u003e\n\n\u003cbr\u003eWire compatibility covers the full range from .012\" (.30 mm) round pins up to .021\" × .025\" (.53 mm × .64 mm) rectangular stainless steel, all round and rectangular archwire sizes used from initial levelling through finishing. The smooth tapered tip improves patient comfort during intraoral manipulation and reduces the chance of the tip dragging on soft tissue as the instrument is positioned behind the last bracket. The cutter also trims flush to the distal of the buccal tube, reducing the risk of crimping the tube entrance, a complication that prevents the next heavier archwire from being threaded through. Stainless steel, approximately 4.5\" in length, autoclavable.\u003c\/p\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751022428474,"sku":"RT712","price":189.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/RT712-Universal-Cut-and-Hold-Distal-End-Cutter-01.jpg?v=1792584804"},{"product_id":"surgiworld-mathieu-narrow-tip-pliers-14cm-rt331","title":"SurgiWorld – Mathieu Narrow Tip Pliers - 14cm","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Mathieu Narrow Tip Pliers, 14cm, are used to hold and place small elastic auxiliaries in orthodontic treatment. The slim serrated tip suits small elastics and ligatures that a wider tip would crush or hide.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eThe locking mechanism and narrow profile give high visibility and control when you stretch and place a ligature over a bracket, especially in crowded or hard-to-reach areas. The lock holds the elastic without you having to keep squeezing, which makes placement faster.\u003c\/p\u003e\u003cp\u003eCompared with the wide tip version, the slim tip reaches posterior brackets and tight spaces between teeth more easily.\u003c\/p\u003e\u003ch4\u003eCare and Handling\u003c\/h4\u003e\u003cp\u003eOrthodontic pliers should be used only for the job they are made for. Check that the tips meet evenly before each use, and do not use these pliers to cut wire, which will damage the working surfaces. Keep the box joint free of resin and cement, and put a drop of instrument lubricant on it before sterilization so the pliers keep opening and closing smoothly.\u003c\/p\u003e\u003cp\u003eRun a cloth or brush over serrations and grooves during cleaning, because debris trapped there reduces grip.\u003c\/p\u003e\u003cp\u003ePliers stored loose in a drawer can knock their tips out of alignment. Keep them in a cassette or tray so the beaks are protected between uses and the instrument is ready when the next patient sits down.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eMathieu pliers, 14cm overall length\u003c\/li\u003e\n\u003cli\u003eSlim serrated tip for small elastic auxiliaries\u003c\/li\u003e\n\u003cli\u003eLocking mechanism holds the elastic while you place it\u003c\/li\u003e\n\u003cli\u003eNarrow profile for visibility in crowded arches\u003c\/li\u003e\n\u003cli\u003eReaches hard-to-access brackets\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751022461242,"sku":"RT331","price":129.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Mathieu-Narrow-Tip-Pliers.webp?v=1792584805"},{"product_id":"surgiworld-mathieu-wide-tip-pliers-14cm-rt312","title":"SurgiWorld – Mathieu Wide Tip Pliers - 14cm","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Mathieu Wide Tip Pliers, 14cm, are used to hold and place elastic ties and chains in orthodontic treatment. The wider serrated tip gives more contact area, which makes it easier to grip larger elastic ties and chains securely.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eThe locking handle holds the elastic between your fingers' squeezes, which gives stability and makes rubber band placement quick during routine check-ups. The sturdy 14cm body suits repeated daily use.\u003c\/p\u003e\u003cp\u003eClose the handle to lock onto the elastic, guide it over the bracket, then release. The serrated tips keep the elastic from sliding as you stretch it.\u003c\/p\u003e\u003ch4\u003eUse and Care\u003c\/h4\u003e\u003cp\u003eOrthodontic hand instruments are used all day and handled with gloves that are wet from saliva, so a clean, secure grip matters. Wipe off bonding resin, cement and elastomeric debris before it hardens, and clean joints and serrations with a brush before the instrument goes into the ultrasonic bath and autoclave.\u003c\/p\u003e\u003cp\u003eCheck the tips for wear or bending at the start of each week, because a damaged tip can scratch brackets or tear elastics.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eMathieu pliers, 14cm overall length\u003c\/li\u003e\n\u003cli\u003eWide serrated tip for a larger gripping area\u003c\/li\u003e\n\u003cli\u003eLocking handle for stable, efficient elastic placement\u003c\/li\u003e\n\u003cli\u003eFor larger elastic ties and chains\u003c\/li\u003e\n\u003cli\u003eSuited to routine orthodontic check-ups\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751022494010,"sku":"RT312","price":129.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Mathieu-Wide-Tip-Pliers.webp?v=1792584806"},{"product_id":"surgiworld-direct-bond-bracket-holder-rt351","title":"SurgiWorld – Direct Bond Bracket Holder","description":"\u003cp\u003eDirect Bond Bracket Holder is selected for the pickup-to-placement step of direct bonding, where a bracket needs to be held securely and precisely positioned before the adhesive cures.\u003c\/p\u003e\u003cp\u003eThe defining feature is the thin, precise tip pair that grips the bracket wings firmly enough to control its position through placement, while staying narrow enough to keep the bonding site visible for a final position check.\u003c\/p\u003e\u003cp\u003eClinically, this holder is used to place and position brackets during direct bonding procedures across most bracket types and tooth positions. Medical-grade stainless steel, corrosion resistant, fully autoclavable.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eDirect Bond Bracket Holder grips bracket wings securely during adhesive placement\u003c\/li\u003e\n\u003cli\u003eThin tip profile keeps the bonding site visible for a final position check\u003c\/li\u003e\n\u003cli\u003eStandard tip design covers routine direct bonding across most bracket types\u003c\/li\u003e\n\u003cli\u003eLets the clinician position the bracket precisely before the cure light is used\u003c\/li\u003e\n\u003cli\u003eUsed for bracket pickup and placement during direct bonding\u003c\/li\u003e\n\u003cli\u003eMedical-grade stainless steel, corrosion resistant, fully autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751022821690,"sku":"RT351","price":94.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Direct-Bond-Bracket-Tweezers.webp?v=1792584808"},{"product_id":"surgiworld-orthodontic-picker-ligature-director-rt822","title":"SurgiWorld – Orthodontic Picker \u0026 Ligature Director","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Orthodontic Picker and Ligature Director is a double-ended hand instrument for daily orthodontic adjustments. One end is a sharp picker for removing elastic ligatures and debris, and the other is a ligature director for tucking wire tails and seating ties.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eHaving both functions on one handle cuts down the number of tools on the tray and speeds up bonding and adjustment appointments. The balanced double-ended design lets you remove old ligatures with the picker, then turn the instrument to tuck the new wire ends under the arch.\u003c\/p\u003e\u003cp\u003eUse the picker with light pressure so it lifts the ligature without scratching the bracket or the enamel.\u003c\/p\u003e\u003ch4\u003eUse and Care\u003c\/h4\u003e\u003cp\u003eOrthodontic hand instruments are used all day and handled with gloves that are wet from saliva, so a clean, secure grip matters. Wipe off bonding resin, cement and elastomeric debris before it hardens, and clean joints and serrations with a brush before the instrument goes into the ultrasonic bath and autoclave.\u003c\/p\u003e\u003cp\u003eCheck the tips for wear or bending at the start of each week, because a damaged tip can scratch brackets or tear elastics.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eSharp picker end for elastic ligatures and debris\u003c\/li\u003e\n\u003cli\u003eLigature director end for tucking wire tails and seating ties\u003c\/li\u003e\n\u003cli\u003eDouble-ended design reduces tools on the tray\u003c\/li\u003e\n\u003cli\u003eFor routine adjustments and bonding visits\u003c\/li\u003e\n\u003cli\u003eBalanced handle\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751022854458,"sku":"RT822","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Picker-Ligature-Director.jpg?v=1792584810"},{"product_id":"surgiworld-utility-plier-de221","title":"SurgiWorld – Utility Plier","description":"\u003cp\u003eUtility Plier is a foundational instrument for any diagnostic or restorative tray, used whenever cotton rolls, pellets, or wedges need to be placed or removed with a secure, controlled grip.\u003c\/p\u003e\u003cp\u003eThe defining feature is the serrated tip, which prevents small, smooth-surfaced materials from slipping free mid-transfer, combined with an angled design that improves visibility and reach into posterior areas of the mouth.\u003c\/p\u003e\u003cp\u003eClinically, these tweezers are used for placing and removing cotton rolls, cotton pellets, wedges, and carrying medicated dressings to a cavity site. Medical-grade stainless steel, corrosion resistant, fully autoclavable.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eUtility Plier has a serrated, non-slip tip\u003c\/li\u003e\n\u003cli\u003eHandle cotton rolls, cotton pellets, and wedges securely\u003c\/li\u003e\n\u003cli\u003eAngled design improves visibility and reach in posterior regions\u003c\/li\u003e\n\u003cli\u003eInterior serrations carry medicated dressings without dropping them\u003c\/li\u003e\n\u003cli\u003eStandard foundational instrument for diagnostic and restorative trays\u003c\/li\u003e\n\u003cli\u003eDoes not obstruct the clinician's line of sight during placement\u003c\/li\u003e\n\u003cli\u003eMedical-grade stainless steel, corrosion resistant, fully autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751023935802,"sku":"DE221","price":49.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Utility-Pick-up-Dressing-Pliers.webp?v=1792584847"},{"product_id":"surgiworld-band-pusher-and-scaler-single-sided-serrated-tip-rt823","title":"SurgiWorld – Band Pusher and Scaler, Single-Sided Serrated Tip","description":"\u003ch4\u003eClinical Use\u003c\/h4\u003e\u003cp\u003eThe Band Pusher and Scaler is a dual-purpose orthodontic instrument for seating molar bands and cleaning up after placement. The band pusher end seats the band, and the scaler end removes excess cement or flash around the band.\u003c\/p\u003e\u003ch4\u003eDesign and Handling\u003c\/h4\u003e\u003cp\u003eThe pusher tip is rectangular with single direction horizontal serrations. Unlike cross-serrated pushers, the one-way lines give a firm, non-slip hold on the edge of the band without too much friction or damage to the band material under downward pressure.\u003c\/p\u003e\u003cp\u003eThe scaler end has a small, modified hook. The compact shape gets into tight posterior spaces to remove excess cement. Use the pusher end for seating, then turn the instrument to clean the margins.\u003c\/p\u003e\u003ch4\u003eUse and Care\u003c\/h4\u003e\u003cp\u003eOrthodontic hand instruments are used all day and handled with gloves that are wet from saliva, so a clean, secure grip matters. Wipe off bonding resin, cement and elastomeric debris before it hardens, and clean joints and serrations with a brush before the instrument goes into the ultrasonic bath and autoclave.\u003c\/p\u003e\u003cp\u003eCheck the tips for wear or bending at the start of each week, because a damaged tip can scratch brackets or tear elastics.\u003c\/p\u003e\u003ch4\u003eMaterial and Sterilization\u003c\/h4\u003e\u003cp\u003eMade from medical grade stainless steel. Autoclavable for repeated sterilization cycles. Clean and dry the instrument after each use, and check the working ends for wear or damage before it goes into the pouch.\u003c\/p\u003e\u003ch4\u003eProduct Features\u003c\/h4\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003eBand pusher end with a rectangular tip and single direction horizontal serrations\u003c\/li\u003e\n\u003cli\u003eNon-slip hold on the band edge without excess friction\u003c\/li\u003e\n\u003cli\u003eScaler end with a small modified hook\u003c\/li\u003e\n\u003cli\u003eRemoves excess cement and flash around seated bands\u003c\/li\u003e\n\u003cli\u003eAccess to tight posterior spaces\u003c\/li\u003e\n\u003cli\u003eMedical grade stainless steel, autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751024329018,"sku":"RT823","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/Band-Pusher-Scaler-02.webp?v=1792584859"},{"product_id":"surgiworld-micro-cutter-pin-ligature-long-rt711l","title":"SurgiWorld – Micro Cutter Pin \u0026 Ligature, Long","description":"Second molar bracket ligation is one of the most physically demanding small-motor tasks in routine orthodontic adjustment. The combination of limited interarch clearance, reduced patient mouth opening, the buccal tube close to the distal bracket, and the distance from the operator's hand to the working zone means that standard-length instruments require the clinician to insert their hand far enough into the oral cavity that finger placement and cutting angle become difficult to control. Cutting the ligature tail too long leaves a wire end that irritates buccal mucosa; cutting too short increases the chance of the ligature unraveling between appointments.\u003cbr\u003e\u003cbr\u003eThe Micro Cutter Pin \u0026amp; Ligature, Long addresses this by extending the handle length to move the operator's hand further from the working tip without changing the tip geometry. The clinician positions their fingers on the handle in a comfortable fulcrum grip, and the extended body carries the fine cutting tips to the target bracket at the correct angle without strained wrist position or loss of visual control. The same slim profile and pointed tapered tips as the standard Micro Cutter navigate tight interproximal spaces and position flush against the bracket wing for close ligature tail cuts.\u003cbr\u003e\u003cbr\u003eWire cutting capacity is up to .012\" (.30 mm), appropriate for standard stainless steel ligature wire and soft wire pins. The long-handle design is also practical for patients with limited mouth opening due to temporomandibular joint restriction, post-surgical edema, or anxiety-related muscle tension, where reducing intraoral hand depth improves both access and patient comfort. This instrument works as a pair with the standard-length Micro Cutter Pin \u0026amp; Ligature, the standard version for anterior and premolar regions, the Long for second molar and difficult posterior access. Stainless steel, autoclavable.","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751028851002,"sku":"RT711L","price":189.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/RT711L-Micro-Cutter-Pin-Ligature-Long.webp?v=1792584970"},{"product_id":"surgiworld-universal-cut-and-hold-distal-end-cutter-long-rt712l","title":"SurgiWorld – Universal Cut and Hold Distal End Cutter, Long","description":"\u003cp\u003eThe critical difference between the standard and long-handle distal end cutter is reach. Cutting wire flush distal to a second molar buccal tube requires placing the cutter tip in a region where the buccal mucosa, the cheek retractor, and the posterior limit of the oral opening all compete for space. With a standard-length handle, the operator's fingers are relatively close to the patient's lip line, which constrains wrist rotation and makes visual confirmation that the cut is positioned exactly distal to the tube - not across it - more difficult.\u003c\/p\u003e\n\u003cp\u003eThe extended handle of the Long version moves the operator's grip back along the instrument, increasing the distance between the working tip and the finger position. This gives the clinician more rotational freedom to angle the working end accurately against the buccal tube, reduces the visual obstruction caused by the operator's own hand, and decreases the likelihood of the instrument contacting adjacent soft tissue during positioning. In patients with limited mouth opening - such as those with TMJ pathology, post-surgical restriction, or gag reflex sensitivity - the extended handle may allow the operator to maintain a standard finger fulcrum position on the cheek or teeth rather than inserting the hand further intraorally.\u003c\/p\u003e\n\u003cp\u003eAll clinical functions are identical to the standard Universal Cut and Hold Distal End Cutter. The cut-and-hold mechanism retains the cut wire segment after severing, preventing the trimmed piece from falling free in the patient's mouth. Wire capacity covers .012\" (.30 mm) through .021\" × .025\" (.53 mm × .64 mm), encompassing the full spectrum of round and rectangular archwires used in fixed appliance treatment from initial levelling to finishing. The smooth tapered tip cuts flush distal to the buccal tube without risk of crimping the tube entrance. Approximately 5.1\" in length, medical-grade stainless steel, autoclavable.\u003c\/p\u003e\n","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751028883770,"sku":"RT712L","price":189.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/RT712L-Universal-Cut-and-Hold-Distal-End-Cutter-Long-01.webp?v=1792584972"},{"product_id":"surgiworld-band-pusher-picker-orthodontic-band-seating-and-removal-rt824","title":"SurgiWorld – Band Pusher \u0026 Picker, Orthodontic Band Seating and Removal Instrument","description":"\u003cp\u003eThe band pusher and picker orthodontic instrument covers the two core hand tool tasks required at every molar band appointment: seating the band fully onto the tooth and removing or repositioning it for fit adjustment. Rather than carrying two separate single-ended tools, the clinician works through the entire band procedure with one double-ended instrument. Orthodontic molar bands are fitted across two appointments, try-in and sizing followed by cementation, and at each stage the ability to push the band into position and pick it back off the tooth is needed within the same working sequence.\u003cbr\u003e\n\n\u003cbr\u003eThe pusher end carries a rectangular, serrated tip set at an angle to the shank. The rectangular profile distributes seating force across the full width of the band rather than concentrating it on a single edge, reducing the risk of distorting the band or rocking it out of alignment during the seating stroke. The serrations grip the band surface so the tip does not slide off under pressure. The clinician places the tip against the occlusal edge of the band and applies firm, steady inward pressure, driving the band toward the gingival margin in small incremental strokes around the circumference of the tooth. After instrument pressure, the patient may also be asked to bite on a bite stick for final seating. Together, these steps bring the band to its correct gingival level without tilting or distortion.\u003cbr\u003e\n\n\u003cbr\u003eThe picker end uses a hooked or angled fine tip to engage the band at points where the pusher end cannot work. During the fitting appointment, the picker repositions a band that has tipped or canted before it is fully seated. It also picks up the band from the tooth surface when removal for adjustment is needed, engaging under the occlusal edge to lift the band clear without levering against the enamel surface or surrounding soft tissue. At the band removal appointment, whether during bracket debonding at the end of treatment or during a band replacement procedure, the picker tip slides under the gingival margin of the cemented band to break the cement seal before band-removing pliers complete the removal. This step reduces the force the pliers need to apply, lowering the risk of enamel damage during debanding.\u003cbr\u003e\n\n\u003cbr\u003eThe double-ended design means the clinician handles one instrument through both the seating and manipulation stages of the band appointment rather than alternating between two single-ended tools. The handle diameter and balance point support a stable modified pen grasp throughout. Medical-grade stainless steel, corrosion resistant, autoclavable. Cleans effectively in ultrasonic units prior to steam sterilization.\u003c\/p\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751028949306,"sku":"RT824","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/RT891-Band-Pusher-Picker.webp?v=1792584976"},{"product_id":"surgiworld-bracket-positioner-rt891","title":"SurgiWorld – Bracket Positioner","description":"\u003cp\u003eBracket positioner is the primary hand tool used during the bonding stage of fixed appliance treatment. Accurate bracket placement is the foundation of the straight-wire technique: the built-in prescription of tip, torque, and in-out values in each bracket only expresses correctly when the bracket is bonded at the exact center of the clinical crown, known as the facial axis (FA) point. Any deviation from this position in the vertical, mesiodistal, or buccolingual plane introduces an error that persists for the remainder of treatment and requires additional archwire bending to compensate. The bracket positioner gives the clinician reliable control over all three of these placement variables through a single instrument.\u003cbr\u003e\n\n\u003cbr\u003eThe front tip is serrated and sized to grip the bracket body between the tie wings. The serrations prevent the bracket from rotating or slipping on the tip during intraoral transfer from the bonding pad to the tooth surface, which is the most common point of placement error. The slim tip profile fits between adjacent brackets and into posterior regions without contacting adjacent appliances or soft tissue, giving the clinician a clear line of sight to the FA point as the bracket is brought into contact with the adhesive. Once contact is made, the clinician holds the instrument steady while making fine positional adjustments, reading the bracket's horizontal slot orientation and its vertical position relative to the cusp tip or incisal edge before the adhesive begins to tack.\u003cbr\u003e\n\n\u003cbr\u003eThe back end of the instrument provides a second working function. After the bracket is positioned correctly, the clinician rotates the instrument and uses the flat back end to press the bracket base firmly and evenly into the adhesive layer. This seats the bracket flush against the enamel and removes any air gap or rocking at the bracket base that would compromise bond strength. Applying seating pressure through the instrument rather than a finger keeps the bracket position stable and avoids the displacement that often occurs when a gloved fingertip contacts the adhesive around the bracket margins.\u003cbr\u003e\n\n\u003cbr\u003eThe reverse spring action of the body holds the tip closed on the bracket when at rest, so the clinician squeezes to release rather than to grip. This means the instrument maintains its hold on the bracket under relaxed hand pressure, and the bracket only releases when the clinician intentionally opens the tip. This reduces the chance of an accidental drop, particularly important during posterior bracket placement where the retrieval of a dropped bracket from the oral cavity is a clinical interruption. Medical-grade stainless steel throughout, corrosion resistant, autoclavable at standard steam sterilization parameters, and compatible with ultrasonic cleaning prior to sterilization.\u003c\/p\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751028982074,"sku":"RT891","price":69.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/RT891-Bracket-Positioner.jpg?v=1792584979"},{"product_id":"surgiworld-light-wire-bird-beak-plier-with-groove-rt153","title":"SurgiWorld – Light Wire Bird Beak Plier with Groove","description":"\u003cp\u003eForming a loop in a thin archwire without a fixed reference point on the plier beak is a common source of asymmetry on the adjustment tray. Without a locating feature, the clinician must judge wire placement on the cone purely by eye for every loop, which makes it difficult to reproduce the exact same diameter at a second site on the same wire, or to mirror a loop from the left side of the arch to the right. The light wire bird beak plier with groove solves this with a single groove cut into the inner surface of the working beak. The groove gives the clinician a fixed seating point for the wire, so once a loop diameter is established at that position, it can be repeated reliably across multiple bends in the same appointment.\u003cbr\u003e\n\n\u003cbr\u003eThe beak itself is longer and tapers more gradually than a standard bird beak cone, a design feature aimed specifically at light, thin-gauge wires. Beak length matters here because it gives the operator a wider range of loop diameters from a single instrument, from very tight loops near the tip to wider loops further down the cone, while the groove fixes one of those positions for exact duplication. The smooth beak surface outside the groove remains polished to avoid stress concentration marks that weaken the wire at the bend.\u003cbr\u003e\n\n\u003cbr\u003eWire capacity tops out at .020\" (.51 mm), placing this instrument squarely in the initial archwire phase: .014\" and .016\" round nickel-titanium and stainless steel wires used for early alignment and levelling, along with light auxiliary springs. For intermediate and finishing rectangular wires, a heavier bird beak pattern with a higher wire capacity is the correct choice. The box joint construction holds beak alignment through repeated use, and spring-return handles reduce hand fatigue across a full adjustment sequence. Medical-grade stainless steel, fully autoclavable at standard steam sterilization parameters.\u003c\/p\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751029014842,"sku":"RT153","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/RT153-Light-Wire-Bird-Beak-Pliers-with-Groove.webp?v=1792584980"},{"product_id":"surgiworld-long-tapered-bird-beak-plier-rt154","title":"SurgiWorld – Long Tapered Bird Beak Plier","description":"As treatment progresses past the initial alignment phase, archwires increase in both stiffness and cross-sectional size, and the loops, hooks, and contours the clinician needs to form in these heavier wires require an instrument with longer reach and a higher wire capacity than the light wire pattern used earlier in treatment. The long tapered bird beak plier is built for this stage. Its beaks extend further from the box joint than a standard cone, giving the operator the working length to access posterior interbracket spaces, second molar regions, and tight intraoral zones without needing to reposition the patient or distort the cheek for visibility.\u003cbr\u003e\u003cbr\u003eThe taper itself is gradual rather than abrupt, which spreads the bending force across a longer section of the wire as it forms a loop, producing a smooth curve rather than a sharp localized bend. This matters for wire fatigue resistance, since a sharply localized bend point becomes a stress riser under repeated occlusal loading. The beak surface is smooth and rounded with no grooves, so bending, straightening, and closing movements can also be performed using the flat section toward the rear of the beak when a less curved bend is needed.\u003cbr\u003e\u003cbr\u003eWire capacity reaches .022\" x .025\" (.56 mm x .64 mm), placing this instrument in the intermediate-to-finishing range of treatment, where rectangular stainless steel archwires are common. The hardened beak tips resist splaying under repeated use, maintaining consistent jaw alignment across the life of the instrument. Box joint construction keeps the beaks aligned through thousands of bending cycles. Medical-grade stainless steel, corrosion resistant, fully autoclavable at standard steam sterilization parameters.\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul class=\"feature-list\"\u003e\n \t\u003cli\u003eLong tapered bird beak plier extends beak reach for posterior and second molar access without repositioning the patient\u003c\/li\u003e\n \t\u003cli\u003eGradual taper spreads bending force across a longer wire section, reducing stress concentration at the bend point\u003c\/li\u003e\n \t\u003cli\u003eHandles intermediate and finishing rectangular wires up to .022\" x .025\" (.56 mm x .64 mm)\u003c\/li\u003e\n \t\u003cli\u003eSmooth, rounded beak surface with no grooves bends wire without scoring or surface damage\u003c\/li\u003e\n \t\u003cli\u003eFlat rear section of the beak allows bending, straightening, and closing movements alongside cone-based loop forming\u003c\/li\u003e\n \t\u003cli\u003eHardened tips resist splaying, maintaining consistent jaw alignment over repeated use\u003c\/li\u003e\n \t\u003cli\u003eMedical-grade stainless steel, fully autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751029211450,"sku":"RT154","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/RT154-Long-Tapered-Bird-Beak-Pliers-2.jpg?v=1792584985"},{"product_id":"surgiworld-bird-beak-pliers-with-cutter-rt155","title":"SurgiWorld – Bird Beak Pliers with Cutter","description":"Many archwire adjustment sequences require forming a bend and then trimming the wire to length immediately afterward, which normally means picking up a separate cutter once the bird beak plier has finished shaping the loop or stop. Bird beak pliers with cutter remove that extra step by combining both functions on one instrument. The front portion of the beak retains the familiar round and square bird beak configuration for loop forming, stop placement, and step bends, while a hardened cutting edge is set into the rear portion of the same beak.\u003cbr\u003e\u003cbr\u003eThe cutting edge uses a diamond-honed anvil design, where one beak carries the sharpened blade and the opposing beak provides a flat anvil surface for the blade to close against. This produces a clean, flush cut rather than a crushed or frayed wire end, which matters both for patient comfort and for the wire end seating properly in the next step of the procedure. Because the cutter sits at the rear of the same beak used for bending, the clinician can form a bend and cut the wire to length without repositioning their hand or reaching for a second instrument.\u003cbr\u003e\u003cbr\u003eBending capacity on the front beaks reaches .020\" (.51 mm) round wire, while the rear cutter handles a higher capacity of up to .025\" (.64 mm), both round and rectangular. This asymmetry is intentional: the cutting edge needs to sever a broader range of wire gauges than any single bend requires, since the wire being trimmed may be heavier than the loop just formed at the tip. The beaks are full hardened tool steel inserts, guaranteed against bending or splaying under normal use. Medical-grade stainless steel, fully autoclavable.\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul class=\"feature-list\"\u003e\n \t\u003cli\u003eBird beak pliers with cutter combine loop forming and wire cutting on one instrument, eliminating a tool change mid-procedure\u003c\/li\u003e\n \t\u003cli\u003eDiamond-honed anvil cutter produces a clean, flush cut rather than a crushed or frayed wire end\u003c\/li\u003e\n \t\u003cli\u003eFront beaks bend round and rectangular wire up to .020\" (.51 mm); rear cutter handles wire up to .025\" (.64 mm)\u003c\/li\u003e\n \t\u003cli\u003eCutter and bending beak share the same working end, so no hand repositioning is needed between forming and cutting\u003c\/li\u003e\n \t\u003cli\u003eFull hardened tool steel inserts on both beaks, guaranteed against bending or splaying under normal use\u003c\/li\u003e\n \t\u003cli\u003eSmooth bending surfaces with no grooves prevent wire scoring during loop formation\u003c\/li\u003e\n \t\u003cli\u003eMedical-grade stainless steel, fully autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751029244218,"sku":"RT155","price":189.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/RT155-Bird-Beak-Pliers-with-Cutter-2.jpg?v=1792584987"},{"product_id":"surgiworld-mini-three-jaw-pliers-rt157","title":"SurgiWorld – Mini Three Jaw Pliers","description":"Three jaw pliers are a general-purpose contouring instrument used throughout orthodontic treatment for shaping arch form, adjusting clasps on removable appliances, and forming gentle curves in wire that a two-beak bird beak plier cannot replicate as smoothly. The three-point contact spreads bending force across a wider section of the wire than a two-jaw design, which produces a more even curve and reduces the localized flattening that can occur when wire is bent against only two opposing surfaces.\u003cbr\u003e\u003cbr\u003eMini three jaw pliers orthodontic instruments take this same three-point design and reduce the jaw head size, which matters most in regions where a standard-size three jaw head is too large to seat cleanly against the wire without contacting adjacent brackets or soft tissue. The smaller head also gives the clinician a clearer view of the contact point during bending, useful when fine contouring decisions need to be made by eye rather than by feel alone.\u003cbr\u003e\u003cbr\u003eWire capacity reaches .030\" (.76 mm), the standard upper range for light to moderate-gauge contouring work, and the rounded jaw surfaces are designed to avoid scoring or marking the wire during the bending motion. This instrument is most useful for fine adjustment of arch form, retainer wire shaping, and clasp contouring on removable appliances, rather than for heavy rectangular wire work, which is better suited to a long tapered bird beak or rectangular arch bending plier. Medical-grade stainless steel, corrosion resistant, fully autoclavable.\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul class=\"feature-list\"\u003e\n \t\u003cli\u003eMini three jaw pliers orthodontic compact head provides access in tight anterior and crowded bracket regions where a standard-size head cannot seat cleanly\u003c\/li\u003e\n \t\u003cli\u003eThree-point jaw contact distributes bending force across the wire, producing smoother curves than two-jaw bending alone\u003c\/li\u003e\n \t\u003cli\u003eRounded jaw surfaces contour wire up to .030\" (.76 mm) without scoring or surface marking\u003c\/li\u003e\n \t\u003cli\u003eReduced head size improves direct visibility of the wire contact point during fine contouring\u003c\/li\u003e\n \t\u003cli\u003eSuited to arch form adjustment, retainer wire shaping, and removable appliance clasp contouring\u003c\/li\u003e\n \t\u003cli\u003eMedical-grade stainless steel, corrosion resistant, fully autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751029276986,"sku":"RT157","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/RT157-Mini-Three-Jaw-Pliers.webp?v=1792584988"},{"product_id":"surgiworld-niti-three-jaw-pliers-rt158","title":"SurgiWorld – NiTi Three Jaw Pliers","description":"Nickel titanium archwire is used throughout orthodontic treatment for its superelastic and shape memory properties, qualities that allow it to apply continuous light force as it gradually returns toward its programmed shape. These same properties make NiTi wire sensitive to instruments that were designed around the mechanical behavior of conventional stainless steel. A plier with sharp-edged or two-point contact jaws can introduce a permanent kink or localized work-hardening in NiTi wire at the bend point, a defect that disrupts the superelastic recovery the wire is meant to provide and effectively converts that section of the wire into a fixed bend rather than a spring.\u003cbr\u003e\u003cbr\u003eNiTi three jaw pliers are built specifically to avoid this. The three rounded jaw surfaces distribute contact force across a wider span of the wire than a two-point pinch, reducing the concentrated stress at any single location. This allows the clinician to make light contouring adjustments, such as easing an arch form curve or adjusting wire position around a bracket, without permanently altering the wire's underlying shape memory characteristics in that segment.\u003cbr\u003e\u003cbr\u003eWire capacity tops out at .020\" (.51 mm), matched to the gauge range where NiTi wire is most commonly used during initial alignment and leveling. This instrument is intended for NiTi wire specifically, and stainless steel wire of comparable gauge can also be worked with it, though a general-purpose mini three jaw plier remains the better choice when NiTi-specific handling is not required. Medical-grade stainless steel, corrosion resistant, fully autoclavable.\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul class=\"feature-list\"\u003e\n \t\u003cli\u003eNiTi three jaw pliers distribute contact force across three points, reducing the risk of permanent kinking or work-hardening in nickel titanium wire\u003c\/li\u003e\n \t\u003cli\u003eRounded jaw surfaces designed to preserve the superelastic and shape memory behavior of NiTi archwire during light contouring\u003c\/li\u003e\n \t\u003cli\u003eHandles wire up to .020\" (.51 mm), matched to common initial-phase NiTi archwire gauges\u003c\/li\u003e\n \t\u003cli\u003eSuited to fine arch form adjustment and positional correction without converting the wire segment into a fixed bend\u003c\/li\u003e\n \t\u003cli\u003eCompatible with stainless steel wire of equivalent gauge when NiTi-specific handling is not required\u003c\/li\u003e\n \t\u003cli\u003eMedical-grade stainless steel, corrosion resistant, fully autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751029309754,"sku":"RT158","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/RT158-NiTi-Three-Jaw-Pliers.webp?v=1792584990"},{"product_id":"surgiworld-step-pliers-1-mm-rt159","title":"SurgiWorld – Step Pliers, 1 mm","description":"Step bends, also called bayonet bends, are used throughout orthodontic treatment to bring an individual tooth into the correct vertical or buccolingual position relative to the rest of the arch without disturbing the alignment of neighboring teeth. Rather than removing the archwire to make this kind of localized correction with a general bending plier, step pliers form the bend directly in the mouth, at the chair, with the wire still engaged in the surrounding brackets.\u003cbr\u003e\u003cbr\u003eStep pliers 1mm orthodontic instruments use a double-sided offset beak. One side of the beak is set forward of the other by a fixed 1 mm offset, so when the wire is placed in the jaws and the handles are closed, the resulting bend steps the wire up or down by exactly 1 mm at that point, while leaving the wire straight on either side of the step. Rotating the instrument 180 degrees before placing the wire reverses the direction of the offset, allowing the same plier to produce either a right-hand or left-hand step depending on which direction the correction requires.\u003cbr\u003e\u003cbr\u003eThe 1 mm increment is the largest in the standard step plier series, used when the required correction is more substantial than a fine detailing adjustment, such as bringing a significantly intruded or extruded tooth closer to the occlusal plane in fewer adjustment visits. For finer increments, the 1\/2 mm and 3\/4 mm step pliers in the same series provide smaller, more conservative corrections. Wire capacity reaches .022\" x .025\" (.56 mm x .64 mm), covering round and rectangular intermediate and finishing archwires. Medical-grade stainless steel, corrosion resistant, fully autoclavable.\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul class=\"feature-list\"\u003e\n \t\u003cli\u003eStep pliers 1mm orthodontic offset beak forms a precise 1 mm bayonet bend without removing the archwire from the mouth\u003c\/li\u003e\n \t\u003cli\u003eReversible orientation produces either a right-hand or left-hand step from a single instrument\u003c\/li\u003e\n \t\u003cli\u003eLargest increment in the standard step plier series, suited to more pronounced extrusion or intrusion corrections\u003c\/li\u003e\n \t\u003cli\u003eHandles round and rectangular wires up to .022\" x .025\" (.56 mm x .64 mm)\u003c\/li\u003e\n \t\u003cli\u003ePairs with the 1\/2 mm and 3\/4 mm step pliers for a complete range of step bend increments\u003c\/li\u003e\n \t\u003cli\u003eMedical-grade stainless steel, corrosion resistant, fully autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751029342522,"sku":"RT159","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/RT159-Step-Pliers-1-mm-2.webp?v=1792584992"},{"product_id":"surgiworld-step-pliers-1-2-mm-rt160","title":"SurgiWorld – Step Pliers, 1\/2 mm","description":"Not every vertical or positional discrepancy in the arch calls for a large correction. In many cases, particularly during the detailing and finishing stages of treatment, the clinician needs a small, conservative adjustment, just enough to bring one tooth into closer alignment with its neighbors without overcorrecting and creating a new discrepancy in the opposite direction. Step pliers 1\/2 mm orthodontic instruments are built for exactly this kind of fine adjustment.\u003cbr\u003e\u003cbr\u003eThe double-sided offset beak design is shared across the entire step plier series, with the offset distance between the two beak surfaces set to 1\/2 mm on this instrument. When the wire is seated in the jaws and the handles are closed, the wire steps by precisely 1\/2 mm at that point while remaining straight to either side. As with the larger increments in the series, rotating the plier 180 degrees before engaging the wire reverses the direction of the step, so a single instrument produces both right-hand and left-hand corrections.\u003cbr\u003e\u003cbr\u003eThis increment is most useful during the finishing phase of treatment, when gross corrections have already been made with larger instruments or earlier archwires, and the remaining adjustments are fine positional refinements. Using the 1\/2 mm step plier where a 1 mm step would otherwise overcorrect helps avoid introducing a new discrepancy that would need to be corrected at a later appointment. Wire capacity matches the rest of the series at up to .022\" x .025\" (.56 mm x .64 mm). Medical-grade stainless steel, corrosion resistant, fully autoclavable.\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul class=\"feature-list\"\u003e\n \t\u003cli\u003eStep pliers 1\/2 mm orthodontic offset beak forms the smallest, most conservative step bend in the standard plier series\u003c\/li\u003e\n \t\u003cli\u003eReversible orientation produces either a right-hand or left-hand step from a single instrument\u003c\/li\u003e\n \t\u003cli\u003eSuited to fine detailing during the finishing phase, where larger corrections risk overcorrecting tooth position\u003c\/li\u003e\n \t\u003cli\u003eHandles round and rectangular wires up to .022\" x .025\" (.56 mm x .64 mm)\u003c\/li\u003e\n \t\u003cli\u003ePairs with the 3\/4 mm and 1 mm step pliers for a complete range of step bend increments\u003c\/li\u003e\n \t\u003cli\u003eMedical-grade stainless steel, corrosion resistant, fully autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751029408058,"sku":"RT160","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/RT160-Step-Pliers-1_2-mm-2.webp?v=1792584993"},{"product_id":"surgiworld-slim-arch-bending-pliers-rt163","title":"SurgiWorld – Slim Arch Bending Pliers","description":"Slim arch bending pliers orthodontic instruments are a refinement of the standard rectangular arch bending plier specifically for use within the interbracket span, where a full-width blade would contact adjacent brackets before the working position is reached. The slim .025\" (.64 mm) blade width gives the clinician room to position the jaws at exactly the point on the archwire where the bend is needed, seat them flush against the wire, and close without the blade edges interfering with the bracket bases or tie wings on either side.\u003cbr\u003e\u003cbr\u003eThe flat, parallel jaws hold the rectangular archwire in a consistent orientation during bending, which is essential for third-order (torque) adjustments. Torque is introduced by twisting the wire around its long axis, and any rotation or slippage of the wire within the jaw during the bending motion introduces an error in the planned torque value. The flat jaw surfaces grip the wire without allowing it to rotate, and the consistent jaw width produces a reproducible bend angle from one activation to the next.\u003cbr\u003e\u003cbr\u003eFirst-order (in-out) and second-order (tip) bends follow the same principle: the slim profile allows precise placement at the intended archwire segment, and the jaw geometry produces the bend accurately without creating unintended secondary bends in adjacent sections of the wire. Wire capacity is up to .022\" x .025\" (.56 mm x .64 mm), covering intermediate and finishing rectangular stainless steel archwires. Medical-grade stainless steel, corrosion resistant, fully autoclavable.\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul class=\"feature-list\"\u003e\n \t\u003cli\u003eSlim arch bending pliers orthodontic .025\" blade width accesses the wire between brackets without contacting adjacent appliances\u003c\/li\u003e\n \t\u003cli\u003eFlat, parallel jaws hold rectangular wire in a fixed orientation for reproducible first, second, and third order bends\u003c\/li\u003e\n \t\u003cli\u003eAnti-rotation jaw grip prevents wire slippage during torque adjustments\u003c\/li\u003e\n \t\u003cli\u003eHandles rectangular stainless steel wires up to .022\" x .025\" (.56 mm x .64 mm)\u003c\/li\u003e\n \t\u003cli\u003eMedical-grade stainless steel, corrosion resistant, fully autoclavable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SurgiWorld","offers":[{"title":"Default Title","offer_id":67751029440826,"sku":"RT163","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/files\/RT163-Slim-Arch-Bending-Pliers.webp?v=1792584995"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/2975\/5194\/collections\/Slim-Weingart-Pliers.jpg?v=1792673684","url":"https:\/\/thedentalsolutions.ca\/en-au\/collections\/surgiworld-orthodontic-instruments.oembed?page=2","provider":"Dental Solutions","version":"1.0","type":"link"}