Woodpecker i-Sensor Technical Specifications
Compare the key technical specifications of the Woodpecker i-Sensor H1, H1.5 and H2 digital intraoral X-ray sensors.
| Specification | H1 — Size 1 | H1.5 — Size 1.5 | H2 — Size 2 |
|---|---|---|---|
| Effective Imaging Area | 20 × 30 mm | 24 × 33 mm | 26 × 36 mm |
| Pixel Matrix | 1000 × 1500 | 1200 × 1650 | 1300 × 1800 |
| Pixel Pitch | 20 μm | 20 μm | 20 μm |
| Scintillation Screen | CsI | CsI | CsI |
| Sensor Dimensions | 38.5 × 25 × 4.5 mm | 43.5 × 29.2 × 4.5 mm | 45.0 × 31.6 × 4.5 mm |
| Theoretical Spatial Resolution | 25 lp/mm | 25 lp/mm | 25 lp/mm |
| Real Spatial Resolution | ≥ 12 lp/mm | ≥ 12 lp/mm | ≥ 12 lp/mm |
| Water & Dust Protection | IP68 | IP68 | IP68 |
| Cable Length | 2.8 m | 2.8 m | 2.8 m |
| Interface | Direct USB 2.0 | Direct USB 2.0 | Direct USB 2.0 |
| Power | 2.5 W | 2.5 W | 2.5 W |
Specifications are based on current Woodpecker i-Sensor documentation and may be subject to manufacturer updates.
Software & System Compatibility
Woodpecker i-Sensor H1, H1.5 and H2 are designed for Windows-based dental imaging workflows. TWAIN-based integration allows the sensors to work with many commonly used dental imaging systems.
Windows Compatible
Designed for Windows-based dental imaging systems, including Windows 10 and Windows 11.
TWAIN Integration
TWAIN-based integration allows the i-Sensor to be used with compatible dental imaging software. Required sensor drivers and calibration files are used during installation and setup.
Ai-Dental Software
Woodpecker Ai-Dental software provides an imaging workflow for the i-Sensor and can be used for capturing and managing digital X-ray images.
Examples of Compatible Dental Imaging Software
Depending on the software version and configuration, Woodpecker i-Sensors may be integrated with commonly used dental imaging platforms, including:
- Open Dental
- Carestream
- DEXIS
- Dentrix
- EagleSoft
- Sopro Imaging
- Vatech EzDent
- Planmeca Romexis
- Sidexis
- Apteryx / XrayVision
- Other TWAIN-compatible imaging software
Buy With Confidence
Not sure whether the Woodpecker i-Sensor will work with your existing dental imaging system? We can help you verify compatibility before you open your sealed sensor.
Demo Device Available
If you are unsure about compatibility, contact us before opening your purchased sensor. Dental Solutions has a demo i-Sensor available for compatibility testing when needed, allowing you to verify the setup with your existing computer and imaging software before opening the sealed sensor.
Live Installation Support
Woodpecker provides live technical support to assist with sensor installation, driver setup, and software configuration, helping you get your i-Sensor working with your compatible imaging system.
What's Included with Your Woodpecker i-Sensor?
Each Woodpecker i-Sensor package includes the essential components needed for sensor installation, positioning, protection, and everyday intraoral digital X-ray imaging.
i-Sensor
Your selected Woodpecker i-Sensor size: H1, H1.5 or H2.
Protective Sleeves
Disposable protective bags designed to help protect the sensor during intraoral imaging procedures.
Sensor Holder & Fixer
Positioning accessories designed to help secure and correctly position the sensor during X-ray imaging.
Silicone Protective Sleeve
A reusable silicone protective accessory designed to help protect the sensor during clinical use.
USB Installation Drive
Includes the software and installation files required for setting up the i-Sensor on a compatible Windows computer.
Fixing Screws & Rubber Stoppers
Installation and positioning accessories supplied with the i-Sensor package.
Instruction Manual
User documentation covering installation, operation, safety, maintenance and other important product information.
Documentation
Product documentation including the qualified certificate and package contents documentation.
Frequently Asked Questions About Woodpecker i-Sensor
Find answers to common questions about i-Sensor sizes, compatibility, installation, operation, and everyday clinical use.
Which i-Sensor size should I choose? +
The H1 (Size 1) is primarily intended for pediatric patients and smaller mouths. The H1.5 (Size 1.5) provides an intermediate option for older children and smaller adults. The H2 (Size 2) is the largest option and is primarily intended for adult patients. Selection should be based on the patient's anatomy and the clinical imaging requirement.
What is the difference between H1, H1.5 and H2? +
The three sensors differ primarily in their physical and imaging area dimensions. H1 is the smallest, H1.5 is an intermediate size, and H2 is the largest. All three are designed for digital intraoral X-ray imaging.
Is the Woodpecker i-Sensor compatible with Windows? +
Yes. The i-Sensor is designed for Windows-based dental imaging workflows. Compatibility can depend on the Windows version, installed drivers, imaging software, and the configuration of the dental practice.
Can I use the i-Sensor with my existing dental imaging software? +
The i-Sensor supports TWAIN-based integration and may work with many commonly used dental imaging platforms. Compatibility can depend on the specific software version and configuration. If you are unsure whether your existing system is compatible, contact Dental Solutions before ordering so we can help verify your system.
Can I test compatibility before opening my sealed sensor? +
If you are unsure whether the i-Sensor will work with your existing computer and dental imaging software, contact Dental Solutions before opening the sealed sensor. When needed, a demo device may be available for compatibility testing with your existing system.
We recommend confirming compatibility before opening your new sensor whenever there is uncertainty about your existing imaging setup.
Does the i-Sensor require special imaging software? +
The i-Sensor requires the appropriate driver and acquisition software for installation and operation. It can also integrate with compatible TWAIN-supported dental imaging software.
How is the i-Sensor connected to the computer? +
The i-Sensor uses a direct USB connection to a compatible computer. The sensor is designed to integrate directly into a digital dental X-ray workflow without requiring a separate image scanner.
Does Woodpecker provide installation support? +
Yes. Woodpecker provides live technical support to assist with installation, driver setup, and software configuration. This can help you get the i-Sensor working with your compatible dental imaging system.
Is the Woodpecker i-Sensor waterproof? +
The i-Sensor is specified with an IP68 protection rating. Appropriate protective barriers and the manufacturer's recommended cleaning and disinfection procedures should still be followed for clinical use.
What pixel size and resolution does the i-Sensor provide? +
The i-Sensor uses a 20 μm pixel pitch and is specified with a theoretical spatial resolution of 25 lp/mm. The specifications apply across the H1, H1.5 and H2 sensor sizes.
How do I protect the sensor during clinical use? +
Use an appropriate disposable protective barrier during intraoral imaging and follow the manufacturer's instructions for cleaning, disinfection, handling, and storage. Do not use procedures that could damage the sensor, cable, connector, or housing.
What if I am not sure about compatibility? +
Do not open the sealed sensor if you are unsure about compatibility. Contact Dental Solutions first. We can review your computer, Windows version, and imaging software to help determine compatibility. When needed, a demo device may be available for testing before opening your new sensor.
Can I return the i-Sensor if it is not compatible with my system? +
Because the i-Sensor is a sealed medical/dental device, we strongly recommend confirming compatibility before opening the package.
Unopened and unused products in their original manufacturer packaging may be eligible for return within 30 days of delivery, subject to our Return & Refund Policy.
If you are unsure about compatibility, please contact Dental Solutions before opening the sensor. We can help review your system, and a demo device may be available for compatibility testing when needed.
If the sensor is confirmed to be defective, it is handled separately under our defective-product policy.
Contact Dental Solutions before ordering. Our team can help you choose the right i-Sensor size, verify software compatibility, and guide you toward the appropriate installation support.